Reply With QuoteI can't imagine the recoil lug space lining up and if you put the lug where it goes you will be 3/4 inch short at the tang. I think it would be cheaper to just get a 440 space stock.
Is it possible to put a short action (4.4 spacing) into a long action stock? The stock has a spacing of just over 5". Actually, I am sure anything is possible so I guess the question should be how hard is it. Do I just need to redrill one hole and everything else will line up or am I way off base. I do not have my action in hand yet so I cannot just compare the two. Thanks for the advice.
I can't imagine the recoil lug space lining up and if you put the lug where it goes you will be 3/4 inch short at the tang. I think it would be cheaper to just get a 440 space stock.
Retired sniper. You can run, But you will only die tired!!!
Sniper is right.
The mag box inlet and the trigger inlet would be all wrong.
OK. Thanks for the info. I will go another route.
POSSIBLE ,YES easy ?????????
I have beded several rifle stocks to a differnt footprint using a dremel, aluminum pillars , kiwi, & devcon 10110
I changed a SA into LA just because I liked the wood in it
Im considering putting my Savage 22lr bull barrel in another Rem BDl stock for the same reason
of course I would have to fill the viod with wood , epoxy or both
it can be done with a few tools & a lot of willie
If your lucky enough to live in the BIG woods your lucky enough
Members who have read this thread in the last 1 days: 0
Posting Permissions
Bookmarks