Guys, I have a problem ... Brand spanking new, unfired 10FCP-5R heavy barrel 24" fluted, HS-Precision stock . I noticed that the action screws were loose so I tightened them to 35 lbs each . Then I went to try the safety and it was stuck ... I then took the action off and everything looked perfect and worked correctly , so I put the action back and the problem is the rear action screw ... if I tight it up it a little , the safety won`t work . The front action screw is ok at 35 lbs . What can I do ? the rear action screw once it gets tight a little , has to be loosened one complete turn in order for the safety to work . Should I leave it like that or what can I do to tight it up ? I really need some help on this ... Thanks