Results 1 to 8 of 8

Thread: aftermarket trigger in a newer bottom bolt release action?

  1. #1
    Team Savage pdog06's Avatar
    Join Date
    Mar 2007
    Location
    Kirkwood, PA
    Age
    52
    Posts
    2,261

    aftermarket trigger in a newer bottom bolt release action?


    Has anyone put an aftermarket trigger onto one of the newer bottom bolt release actions?

    I am pretty sure that a Sav-1 or a Timney will fit.

    BUT

    I just tried a Sav-2 AND a SSS and couldnt get them to work.
    -The Sav-2 seemed to fit fine with the trigger guard button, but the release arm on the sear hits the thicker Sav-2 trigger bracket and will not work without alot of grinding to the one side of the bracket for clearance. For me it wasnt worth it.

    - The SSS was fine as far as the bolt release arm on the sear goes, but the action wouldnt drop back into the stock because the trigger housing sits too low into the trigger guard and hits the bolt release mechanism on the guard. I didnt really see any way to make it work.


    Basically i am just wondering if anyone has gotten either of these two triggers to work with these actions, and if so how? If anyone has used a Timney or a Sav-1 with good results on them i would like to know that as well before i purchase another trigger that wont work.....
    ”I have a very strict gun control policy: if there’s a gun around, I want to be in control of it.”
    ~Clint Eastwood

  2. #2
    Cycler
    Guest

    Re: aftermarket trigger in a newer bottom bolt release action?

    I'd try to contact Rifle Basix and SSS directly and see if they have solved these problems.

  3. #3
    82boy
    Guest

    Re: aftermarket trigger in a newer bottom bolt release action?

    SSS can install the conp trigger in these guns.
    You will have to call them for details.

  4. #4
    Team Savage pdog06's Avatar
    Join Date
    Mar 2007
    Location
    Kirkwood, PA
    Age
    52
    Posts
    2,261

    Re: aftermarket trigger in a newer bottom bolt release action?

    I do not wanna bother Fred during his open business hours when that phone call could be better used by somebody ordering parts.

    Its not really a huge deal for me but I thought Id throw it out there incase anyone has made this swap successfully.

    Maybe Fred will chime in on here later.
    ”I have a very strict gun control policy: if there’s a gun around, I want to be in control of it.”
    ~Clint Eastwood

  5. #5
    Basic Member
    Join Date
    Dec 2006
    Posts
    3,355

    Re: aftermarket trigger in a newer bottom bolt release action?

    The easiest way I have found is to replace the trigger guard with a standard, and modify the bolt release with a small tab welded on almost like the old style. I don't have any pics handy, but I get one up when I do one next.
    I don't know of anybody that is fond of the new trigger guard bolt release.
    "As long as there's lead in the air....there's still hope.."

  6. #6
    Team Savage pdog06's Avatar
    Join Date
    Mar 2007
    Location
    Kirkwood, PA
    Age
    52
    Posts
    2,261

    Re: aftermarket trigger in a newer bottom bolt release action?

    Thanks Fred. I kinda figured there was no simple way to do it.
    ”I have a very strict gun control policy: if there’s a gun around, I want to be in control of it.”
    ~Clint Eastwood

  7. #7
    VjjR
    Guest

    Re: aftermarket trigger in a newer bottom bolt release action?

    Instead of welding a tab on the sear, can i use the older style sear and modify it to go around the action or mill a flat spot on the action?

  8. #8
    82boy
    Guest

    Re: aftermarket trigger in a newer bottom bolt release action?

    Quote Originally Posted by VjjR
    Instead of welding a tab on the sear, can i use the older style sear and modify it to go around the action or mill a flat spot on the action?
    Nope, the sears are super hard, and if you try to bend them they will shatter.

Similar Threads

  1. Aftermarket trigger fir bottom bolt release
    By viper26 in forum 110-Series Rifles
    Replies: 4
    Last Post: 12-17-2017, 06:16 PM
  2. Aftermarket Triggers for Bottom Bolt Release Model 10.
    By DenverDave in forum 110-Series Rifles
    Replies: 2
    Last Post: 11-12-2016, 09:53 AM
  3. Replies: 22
    Last Post: 05-09-2016, 11:39 PM
  4. Replies: 2
    Last Post: 06-04-2015, 01:40 PM

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •