Has anyone put an aftermarket trigger onto one of the newer bottom bolt release actions?

I am pretty sure that a Sav-1 or a Timney will fit.

BUT

I just tried a Sav-2 AND a SSS and couldnt get them to work.
-The Sav-2 seemed to fit fine with the trigger guard button, but the release arm on the sear hits the thicker Sav-2 trigger bracket and will not work without alot of grinding to the one side of the bracket for clearance. For me it wasnt worth it.

- The SSS was fine as far as the bolt release arm on the sear goes, but the action wouldnt drop back into the stock because the trigger housing sits too low into the trigger guard and hits the bolt release mechanism on the guard. I didnt really see any way to make it work.


Basically i am just wondering if anyone has gotten either of these two triggers to work with these actions, and if so how? If anyone has used a Timney or a Sav-1 with good results on them i would like to know that as well before i purchase another trigger that wont work.....