Just finished my first stock build.
4 layers, 1/2" Okoume plywood with West System epoxy. Cutting shaping the stock itself was straightforward, but man, inletting sure is a *****. Any pointers are appreciated!

Caliber is 7-08, first range trip working up some Varget loads with 150 SMK's was pretty decent. Going to try some H4350 as well next week. Long term plan is to rebarrel to a bull with a 9 twist for the 162 Amax.

Fully epoxy bedded with pillars, but I've read some guys leave the rear tang floating. Any substance to this?