10FCP-SR Questions

[dbshabo]

I'm looking for a decent rifle to shoot matches out to 1000yds at my gun club. I'm considering the 10FCP-SR. Does anyone out there know what the thread pitch on the muzzle is? I couldn't find the info on the Savage site. I would like to put a removeable brake on it so I could shoot NRA F class, which doesn't allow brakes, when I get to that level. Anyone know of an effective removeable brake that will fit the factory threads? I like the Badger Ordnance FTE but I think the barrel would require additional modification to use that particular brake.

I'm sorry if this isn't the correct place for this thread. I know this room is for '110' posts. I didn't see a specific room for short action discussion. If I'm in the wrong place please direct me to the correct room. Thanks in advance for any advice offered.

Shabo

[cgeorgemo]

I'm sorry if this isn't the correct place for this thread. I know this room is for '110' posts. I didn't see a specific room for short action discussion. If I'm in the wrong place please direct me to the correct room. Thanks in advance for any advice offered.

Shabo

First ...Welcome to the boards!
Second This is the board for 10, 11, 12, 14, 16, 110, 111, 112, 114, 116 so you are in the right place!
Third. I have no idea bout the threads on the barrel...sorry.

[Aircraftmech76]

.223 will be 1/2-28, and 308 will be 5/8-24. These are considered standard thread pitches for 22 and 30 caliber, respectively.

Regards,

Kevin