I appreciate everyone's help ahead of time!

I just bought my first Savage, a slightly used non-accutrigger, 110 in .270 Win caliber.

This gun has the factory wood stock with no metal pillars. The action screw closest to the recoil lug
pulls up against a plastic/nylon bushing. See below:

[img width=600 height=450]http://www.burfordphotos.com/jonathan/IMG_3157.JPG[/img]


This bushing keeps deforming and is keeping the action screw from getting really tight. I want to replace this before I glass
bed the action. I see no point in glass bedding the action if I can not get it to bolt up tight after wards.

Does anyone have any ideas how I can get this cheap piece of plastic out of my stock?

Thanks!

Jonrobinson