Besides the barrel and bolt face what is required to make this change? Will a new firing pin be required and will this have to be a single shooter only or can a .223 magazine fit the LA mag port?
If this is a staggerfeed,remember that everything was made on a long action and I have one in .223. The box mag has a spacer tack welded inside to shorten it up and it uses the longer front baffle to limit bolt throw,so it is doable if you can find the parts. I would bet sss would have the box mag and the longer front baffle.
Willing to give back for what the sport has done for me!
You will have to use a short action bolt head, and an extended firing pin stop nut to limit the firing pin protrusion. A .223 mag box will work if use use an "L" bracket extension to hols it in place.
"As long as there's lead in the air....there's still hope.."
This is for the new DBM.
sharpshooter can you list the components and advise if you have them in stock.
Get a new bolt, it will be easier.
Do you still have the 7mm Mag bolt, I am looking for one.
GLC
This is what I believe I need as well so I can switch my 25-06 over to shoot .223Originally Posted by sharpshooter
Very interested in getting one of these!
Members who have read this thread in the last 1 days: 0
Posting Permissions
Reply With Quote
Bookmarks