The bolt spacing is the same, but the mag wont fit right.
Its doable just takes some work.
I was going to go that route. Actually bought a CF stock and decided to
buy the correct stock.
I am thinking of buying a stock on here. I found out that it is for a 110 center feed action and I have a 110 staggered feed action. How much work would need to be done to make this stock work with my action.
The bolt spacing is the same, but the mag wont fit right.
Its doable just takes some work.
I was going to go that route. Actually bought a CF stock and decided to
buy the correct stock.
The foreward end of the magwell would need to be opened up about 3/16ths to 1/4th of an inch.
Bookmarks