Striker trigger questions

[capttravis]

Are there aftermarket triggers for the striker ? Will a rifle accutrigger or any aftermarket rifle triggers fit the Striker reciever if I go to a rear grip stock ? I have had several XP-100 remengtons and have used Model 700 triggers on them so was wondering if a model 10,11, or so on will work on the striker.

[Blue Avenger]

if you go rear grip, anything that fits the rifle will fit the striker

[tinkerer]

And if you stay with the mid-grip, Rifle Basix had be made to work. AsK Blue Avenger for his tutorial.

Larry
Tinkerer

[capttravis]

thanks to both of you for replys.....
any info you can share I will be happy to get. I am a machinist by trade so if I need to make a part I can do so....
Would like to stay with center grip if I can get a decent trigger pull. What do I need for putting the aftermarket trigger on and making it work ?

[Blue Avenger]

rifle basix will work, you just take the finger spur off.

[10ring]

Blue avenger, does the rifle basics better than a well tuned factory? I have mine tuned real good but the part that I dont like is the little bit of the take up or is that normal?

[tinkerer]

Take up can be adjusted with the nut up front that tightens the rear down, or at least on a 1st gen thats how it works.

Larry
Tinkerer

[10ring]

Larry, if I adjust it to where there is no take up then I get slam fires when working the bolt. Mine is a gen 2

[Blue Avenger]

you can get it a bit smoother, but you still need a bit of free play in the center grip system to let everything settle in.

[10ring]

Thanks, I was just making sure that I had it right.

[Blue Avenger]

try this guy for custom pins to take out some of the play at the mag box pivot.


Wayment Manufacturing Inc
417 Main Street
Filer, ID (Idaho) 83328
Phone: (208) 326-3566
Business Types: Machine Shops Cnc Machining

[10ring]

Already have one in and it helped. Thanks for the heads up