My second attempt at bedding

[jglover_81]

About a year or so ago I bought a F/TR stock in here for my Stevens .223AI. I decided to bed my action to this stock yesterday. I already run all my bench guns as a single shot so I wasn't worried about putting a target action stock on my Stevens. I built a single shot follower out of cork and used double sided tape to attach it to the stock. I decided to bed completely over all of it so I won't ever have to worry about it. Here are some pics...







[img width=576 height=768]http://i97.photobucket.com/albums/l238/jglover_81/2012-01-22_14-28-52_176.jpg[/img]

[GaCop]

Very nice work. How well does that setup feed rounds?

[jglover_81]

Thanks!! It feeds excellent! The follower is just a few thousandths lower than the bolt head so its as simple as drop the round and push the bolt in.

[HogFan4Ever]

Those pictures do not give that beding job justice. It is one of the best beding jobs I have ever seen done. I am planing to do the exact same thing to my .243 when I get it put back together.

[mcmccurter]

What did you use to bed with?

[GaCop]

What did you use to bed with?

Looks like it's either Devcon or J&B.

[Dennis]

New to beddding: On the recoil lug, do you just put release agent on it and bed it into the stock? Or is there slack required for any reason?

[jglover_81]

It is bedded with Devcon. From what I read on here (I did a LOT of reading before I attempted it ) I put the release agent on the action and the rear part of the lug that contacts the stock. I put 2 layers of masking tape on every other side of the recoil lug. This gives the rear of the lug and only the rear solid contact.

[Dennis]

Did you find any good detailed instructions?

[jglover_81]

There is a really good article on the main page about bedding. If you do a search on here you will find enough information to make your head spin. I took a lot of advise (from my FIL) and how others did theirs and combined all of the good knowledge :D

[ttfreestyle]

looks good , my last one i did that way but just used extra devcon for the follower and it fed great as well.

[jglover_81]

Thanks!