Reply With QuoteI guess if theres a will theres a way, but why you would want to do it is beyond me. There are far better aftermarket stocks that would require much less work. To start you would have to have the same bolt spacing, depdning on the age of your standard action this may be an issue. Next you would have to either convert your standard action to utilize the trigger guard bolt release, (requiring the sear, and other parts from the accu-stock gun.) or cut the opening on the right side of the stock for the bolt release. After that would would either have to cut the recoil lug area of the stock to accept your recoil lug, or get the recoil lug from a accu-stock gun, and place it on your gun. If you was to convert the acu-stock to fit your action you may have some trouble finding a trigger guard to fit, and may have to modify one to fit. The difference in a large shank and a stanard shank is in the barrel, and has nothing to do with the stock.Originally Posted by jsteag
Bookmarks