Reply With QuoteThere's actually three, one at the rear of the trigger, one directly in front of the trigger and one under the button to open the hinged floor plate (you have to open the floor plate to access it).
I just got this gun in .308 with a hinged floor plate for Christmas, and after three trips to the range i am wanting to adjust the accutrigger. However, i cant seem to get the stock off. I followed the instructions in the manual (unscrew the two bolts on the bottom and lift) however it does not come off. This is my first rifle to ever own, so any advice would be appreciate! Thanks!
There's actually three, one at the rear of the trigger, one directly in front of the trigger and one under the button to open the hinged floor plate (you have to open the floor plate to access it).
Yeah thats what i was told, but i cant seem to find the screw in front of the trigger? I found the one under the hinged floor plate and the one behind the trigger, however i just dont see the other. Would you mind posting a picture if at all possible? I appreciate it!
Members who have read this thread in the last 1 days: 0
Posting Permissions
Bookmarks