I don't think it is any worse than the factory stock in respect to support in that area. Even your factory stock is cut on that pillar near the trigger so that it will clear. The main purpose of a pillar to to limit crush of the stock material so consistent torque can be applied. With the B&C A2 you have a full block. There is nothing to worry about. The whole stock bedding area is pretty much a pillar. Torque values differ on who is making the call. You'll find no more than 25 in lbs suggested for straight wood stocks with no pillars to 60in lbs for a full block or pillar bedded stock. Some even play with those value tune the rifle.
Bookmarks