It probably is, but with no pic it's hard to tell. Best bet would be to just call Savage. I'm sure you could give them your serial number and they can get you exactly what you need.
How did you break the safety lever?
I broke the safety lever on my current pruduction Stevens 200 short-action. Brownells lists one safety assembly for Savage 110/111 rifles. Is this the correct safety for my rifle?
http://www.brownells.com/.aspx/pid=1...AFETY_ASSEMBLY
If not, does anybody have the factory part number and a source for the safety?
Stevens 200, .260/ Sin Arms Brux #7, 24"/ Stockade Woodchuck/ Rifle Basix SAV1/ Nikon Buckmaster 4x-14x-40mm
It probably is, but with no pic it's hard to tell. Best bet would be to just call Savage. I'm sure you could give them your serial number and they can get you exactly what you need.
How did you break the safety lever?
”I have a very strict gun control policy: if there’s a gun around, I want to be in control of it.”
~Clint Eastwood
Turning in safety adjustment screw too tight.
Stevens 200, .260/ Sin Arms Brux #7, 24"/ Stockade Woodchuck/ Rifle Basix SAV1/ Nikon Buckmaster 4x-14x-40mm
Bookmarks