i need a light stock

[macon]

for a savage model 12 204 any suggestions

[Terry Balding]

How light?

Everyone has the plastic Savage stocks.

I know a custom builder who makes wood stocks weighing about 2lb.

Terry

[macon]

well my stock weighs 3 lbs im trying to cut weight

[jpdown]

The Savage factory plastic stock with blind magazine are the lightest I've found. The Bell and Carlson Carblite Classic and Stockade Hunter are the lightest composite stocks I have tried at around 28 to 32 oz. If you want to spend big bucks on a Manners then you can get a stock in the 26 oz range. Otherwise, the Savage LWH at 5.5 to 5.8 lbs is the easiest, quickest and most cost effective way to get a trim Savage action and stock.

[Terry Balding]

well my stock weighs 3 lbs im trying to cut weight

If it's wood you can vent the front and drill out the rear.

Terry

[CJ in WY]

well my stock weighs 3 lbs im trying to cut weight

If it's wood you can vent the front and drill out the rear.

Terry

Be a little carefull makeing a wood stock lighter. The laminants are best as birch stocks can get weak/break and a walnut can crack along the grain BTDT It gets tricky getting a stock less than 2# even when you cut the forarm down.

[macon]

front is already vented id like to get a 2lb stock,im cutting my barell to 20 inches that should take off 9.8 oz.