I just bought a axis xp in 30 06. When I took it to the range, it wouldn't fire a round. The firing pin was barely making a dent in the primer. I figured out how to get the bolt apart and there are two springs and a spacer/washer thing inside, and they don't seat together very well. The spacer is like one wound of a spring but has really rough edge where the coil meets. the spring that holds the cocking lug thing is not flat on the end but really crocked compared to the firing pin (ie not perpendicular). And the back spring is flat on both ends but looks really rough on boths ends like someone made it from a normal spring. I think this is the cause of the problem.