110E .270 win trigger help

[icanthunt420]

well heres the problem, i recently did a paint job on my .270 and i took the trigger off to do so and now when i go to put it back together i keep bending the sear spring, does any one have a picture of exactly how it goes in there or a tip on how i can stop this from happening? any help would be greatly appreciated

[BillPa]

well heres the problem, i recently did a paint job on my .270 and i took the trigger off to do so and now when i go to put it back together i keep bending the sear spring, does any one have a picture of exactly how it goes in there or a tip on how i can stop this from happening? any help would be greatly appreciated

This might help > http://members.cox.net/kelley_brown/...erAssembly.htm

Bill

[icanthunt420]

thanks alot this helps a little bit

[Triplebuckshot]

This link does not work anymore. Anyone have a current link? I think I need exactly what is in this link.

[scratcherky]

See if this helps:

http://savageshooters.com/SavageForu...c,19414.0.html

http://savageshooters.com/SavageForu...pic,510.0.html