saftey not working

[cooker900]

Ok im lost

i jsut did a rebarrel on a LA 110 and the saftey is not working.

you can still pull the trigger and get a click when its in the safe position.

i did nothing to the trigger area of the action all i did was remove the barrel and put a new one on.

looking for help in this matter

[Blue Avenger]

turn the set screw on the back of the trigger so you can not pull it. you probable are just now finding it as you were doing a serious test.

[stangfish]

turn the set screw on the back of the trigger so you can not pull it. you probable are just now finding it as you were doing a serious test.

yup. Go through the whole trigger/safety adjustment with the bump/pull tests to be on the safe side.

http://savageshooters.com/SavageForu...pic,510.0.html

[lal357]

the one on my 7mag i just got was doing the same thing i noticed that when it was on safe as i tried to pll the trigger the safety would ride up off the frame before it went click. since it was broke (at the tang) i replaced it and the new one did the same thing found a allenscrew in the center of the safety and turned it just till it made contact with the frame .reset the other screws on the trigger checked for function works like a charm now.

[cooker900]

thanks ill do that when i get home

[cooker900]

thanks guys it worked