I know this is a fairly common problem and I want to get some feedback as to how any of you have corrected the problem. I have a Savage 10FP and I shoot it quite often, and there is one thing that has begun to bother me. The 4 holes that Savage drilled and tapped for the scope base are not correctly aligned with the bore. I switch between shooting 110gr and 168gr bullets and this causes me to use 4" elevation and 2" windage. I have noticed the clicks on my Bushnell 3200 are not perfect and I believe the misaligned base is the culprit. There is only 2.5" of windage available to the right and because I am using a 20 MOA base but am shooting at 100 yards the elevation is nearly bottomed out as well. I would like to get this fixed in 2 weeks time or less and am weary of shipping the gun due to its weight and added delay. I am in San Antonio. Any recommendations?