Results 1 to 4 of 4

Thread: Need help with Savage feeding.

  1. #1
    Ishooter
    Guest

    Need help with Savage feeding.


    Hi all. I just got a new Savage (11FCNS in 243 Winchester). I like it. I was running some dummy rounds through it to check function. About every other round hung up. Any one have a cure for that. It has been raining here and I haven't had a chance to zero the rifle in yet. So as of now it hasn't been shot. That shouldn't make a difference in function. I changed the order of the dummy rounds and that made no difference. I thought at first it might be the rounds, it isn't. Any one have any ideas on how to fix this? Thank you much for your time.

  2. #2
    bbradford71
    Guest

    Re: Need help with Savage feeding.

    When you say hanging up, what exactly do you mean? I had a similar issue where the bolt was not catching the third round and loading it into the chamber, the bolt was just passing over top of the round. I took the barreled action off of the stock and slightly opened up the lips on the internal mag and problem solved.

  3. #3
    Ishooter
    Guest

    Re: Need help with Savage feeding.

    The rifle has a detachable mag. When you go to slide the bolt closed, the shell hangs. I backed the bolt off a little and the shell dropped free. I guyed it into the chamber and closed the bolt and cycled it through. It didn't rain today and I got out to sight it in. It only hung up once out of fifty rounds. I went through thirty hand loads and a box of Winchester, all 100 GR. The best I could do to day was about 1.5" at 100 yards. I put a 4X20 Weaver on it. That 20X is really nice you don't need a spotting scope with it. I am going to try and tune my load. I am using 42 GR of Reloder 22 under a 100GR spitzer from Sierra. I shot twenty flat base and ten boat tail. At my skill level they shot about the same. I have a TC in 243 that I get 3/4" at a 100 yards with the boat tail lode. Then I never used the flat base load in it. Any one have any really good 243 load.

  4. #4
    kenn1320
    Guest

    Re: Need help with Savage feeding.

    Hey I have the same problem with my model 111 in 270 win. Thanks to your suggestion I pulled my mag out and did a little tweaking to the retainer lips (spread them out) and now my gun cycles ever round, ever time. Thanks!
    Ken

Similar Threads

  1. feeding a Savage 116 7mm 180 ELD-M
    By AKSavage in forum 110-Series Rifles
    Replies: 6
    Last Post: 11-03-2017, 11:51 AM
  2. Mark I/II/93R: Savage MK II TRR-SR feeding issues
    By fastfire in forum Savage & Stevens Rimfire Rifles
    Replies: 4
    Last Post: 04-08-2015, 10:44 AM
  3. Savage 99: Savage 99 308 not feeding right
    By DHambone in forum Vintage Savage/Stevens/Fox Firearms
    Replies: 0
    Last Post: 03-28-2014, 11:36 AM
  4. Savage 116 feeding issue.
    By Dirtydeeds in forum 110-Series Rifles
    Replies: 0
    Last Post: 08-04-2013, 01:11 PM
  5. Centerfire: Savage 340 Feeding problems
    By North-Woods in forum Vintage Savage/Stevens/Fox Firearms
    Replies: 2
    Last Post: 09-23-2011, 01:54 PM

Members who have read this thread in the last 1 days: 0

There are no members to list at the moment.

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •