Results 1 to 7 of 7

Thread: A couple of questions about 10pc

  1. #1
    banded
    Guest

    A couple of questions about 10pc


    I am going to be getting a Savage 10PC with accustock. in the next day or two and have a few questions to bounce off everybody.

    1. How much speed and range am I going to lose by going with the short barrel over the 24 inch barrel?

    2. Will this gun stabilzer Berger 175 grain vlds?

    3. Do you think any additional work will need to be done to gun to gain any more accuracy???

    Thanks,
    Richard

  2. #2
    dcloco
    Guest

    Re: A couple of questions about 10pc

    I am wondering why you want to shorten the barrel? No issue with it, just wondering.

    If anything, would leave it at 24" and have it recrowned professionally.

    Rule of thumb is 25 fps per inch. Varies with the caliber though....among twenty eight other items. :)

  3. #3
    banded
    Guest

    Re: A couple of questions about 10pc

    This gun comes with a 20 inch barrel from the factory... So I dont plan on making the barrel any shorter.. Just curious from the other 10fp with say a 24 or 26 inch barrel.

  4. #4
    Basic Member
    Join Date
    Mar 2007
    Posts
    258

    Re: A couple of questions about 10pc

    Banded, i have one in .308 that i have been using in the 3-500yd range that shoots well. I haven't used anything heavier than 150gr, however you should be able to use 175's. My 10pc likes hornady 150gr interlocks best for grouping.
    It is said that you won't lose anything until you get below 22". There is a good field test on here of the 10pc if you join, well worth the money. blue

  5. #5
    WiFowler
    Guest

    Re: A couple of questions about 10pc

    Quote Originally Posted by banded
    This gun comes with a 20 inch barrel from the factory... So I dont plan on making the barrel any shorter.. Just curious from the other 10fp with say a 24 or 26 inch barrel.
    I'm still on the fence about buy in the 10PC. Co-worker has one and I've had a chance to shoot it side by side with a Remmy 5R. Both will drive tacks. I really like the 10PC, but then again, I have a plethora of Remmies. Decisions, decisions. For my purposes, I don't think I'd be giving up much, other than 4" of bbl for the 10PC. The ~$300 difference between the 10PC and 5R buys a lot of ammo and/or components,

  6. #6
    Basic Member
    Join Date
    Oct 2009
    Posts
    54

    Re: A couple of questions about 10pc

    Mine is putting 155gr bergers in to one hole out to 250yrds haven't shot it any farther yet.
    also shoots 168gr noslers real well.

  7. #7
    wetaylor
    Guest

    Re: A couple of questions about 10pc

    Have just broken in and fired my new 10pc. 150 hornady interlocks 3/4" @ 100yd. Am going to try some federal 165 vital shok sp nosler. Winchester powermax 150gr were all over the place 3" groups!

Similar Threads

  1. A couple 110 questions.
    By OldDog in forum 110-Series Rifles
    Replies: 11
    Last Post: 02-12-2018, 02:29 PM
  2. Mark I/II/93R: just a couple questions
    By krazykurt88 in forum Savage & Stevens Rimfire Rifles
    Replies: 2
    Last Post: 06-24-2013, 11:06 PM
  3. couple of questions about a build i'm doing
    By lal357 in forum 110-Series Rifles
    Replies: 5
    Last Post: 10-19-2011, 11:59 PM
  4. Couple of Tool questions
    By Peter_Kirch in forum Ammunition & Reloading
    Replies: 10
    Last Post: 04-24-2010, 01:29 PM
  5. couple of questions
    By larr in forum 110-Series Rifles
    Replies: 11
    Last Post: 03-11-2010, 12:19 AM

Members who have read this thread in the last 1 days: 0

There are no members to list at the moment.

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •