Need some help. I need some advice and info on Pillar bedding a stock.
I built a cherry stock for my 110 but I want to install pillars.
Question is where do I get correct Stock screws and pillars. Found pillars at brownells and screws that are for a Rem 700 but I dont know if the head is correct. They need to be slightly longer than the stock ones?
Any help here?
Larry
I got this pillar kit off of Ebay and it worked perfect for the rifle I build my son. I will get another of the same for the next build. Luck, Tim
http://www.ebay.com/itm/Gunsmith-Acc...ht_2561wt_1375
I use aluminum spacers from McMaster-Carr.
Thanks for the help guys and Ill definately checkout the spacers from MM
Now where to find screws that are longer than stock savage ones???
Larry
Ask and you shall receive
http://www.snipershide.com/forum/ubb...69#Post2910969
WOW!!! I'm impressed!!.....When they said you guys were full of it...they were right! ;D Ummm, useful information I mean!! ;D
the screws are 1/4x28,i got mine at ace hardware
Get them long, spin a nut on them, cut them a bit longer than needed then polish the ends smooth, spin off the nut, check the threads, done deal.
Oz never gave nothing to the Tin Man, that he didn't already have.
Fastenal is a good place to get the screws, they have many different head styles.
+1 for ACE. I learned the hard way Lowe's doesn't carry them..Originally Posted by josebd
Vietnam Vet, Jun 66 - Dec 67
Bookmarks