Yesterday while at the range my Savage Model10FP .308 was firing just fine as it's done with hundreds of rounds then all of a sudden it quit. I keep the AccuTrigger set on the lightest pull and noticed before it completely quit firing the AccuTrigger would click when pulled it and I'd have to cock the bolt back partially then reseat it for it to fire. Then it stopped firing completely and I could hear trigger action yet no marks were on the shell primer indicating the firing pin didn't move. I don't understand this trigger system well enough to start disassembling it and hope it's something others have experienced and can relate a simple repair. Could it be a problem caused by the trigger being adjusted to max on the light pull side ?....I'd appreciate any help in fixing this problem as I don't want to send the gun to Savage for repair...