Results 1 to 2 of 2

Thread: Stuck ejector rod

  1. #1
    CJ in WY
    Guest

    Stuck ejector rod


    Had a load that shot great but was too hot for 90º weather......blew a primer and now the ejector pin is gone. Kinda figured it just got ramed down the hole too far but??
    So how the best way to go about fixing this?

  2. #2
    Basic Member
    Join Date
    Jul 2009
    Location
    West Tn
    Age
    52
    Posts
    946

    Re: Stuck ejector rod

    take a small punch and knock the retaining pin out, pull out the ejector and spring and replace the spring. Or you can just stretch the spring back out.

Similar Threads

  1. Stuck ejector
    By Slugger in forum Axis Series Rifles
    Replies: 19
    Last Post: 11-24-2013, 03:52 PM
  2. 110 ejector pin stuck!!!
    By HOYTPRO2001 in forum 110-Series Rifles
    Replies: 3
    Last Post: 01-29-2013, 12:58 AM
  3. Stuck ejector???
    By dnuke146 in forum 110-Series Rifles
    Replies: 3
    Last Post: 05-04-2010, 08:18 AM
  4. Ejector pin stuck in bolt
    By Dennis in forum 110-Series Rifles
    Replies: 13
    Last Post: 03-31-2010, 11:45 PM
  5. Ejector stuck ?
    By bythebook in forum 110-Series Rifles
    Replies: 4
    Last Post: 10-11-2009, 10:00 AM

Members who have read this thread in the last 1 days: 0

There are no members to list at the moment.

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •