The Savage Striker linkage is 3 versions.
The Gen 1 version uses a linkage with roller bearings to press down on the rear of the trigger bar. Could be duplicated or even transferred from someone who has removed theirs and gone rear trigger.
Gen 2 and 3 use a teeter totter linkage that presses down on the front of the trigger bar.
Personally I feel they are all over-complicated. If I were doing it, I would do something real simple like start with the accutrigger or the SSS and fab up a small bracket for my trigger on the recoil pad (ala XP) and a simple push bar to the trigger show with a thread adjustment for take up.
Or you can make an electric trigger. With all the paint ball guns out there, several have aftermarket electric triggers. All you would need to do is devise a bracket to hold the soleniod for pushing on the trigger bar somehow.
There are a few ideas for you. IMHO, the simpler, the better. Also, most that went to rear trigger did so to reduce recoil as the whole weight of the gun now lies on the front of the action.
Larry
Tinkerer
Bookmarks