338 Edge

[WSMBUCK]

Can any of you guys pass along some of your pet loads for the 338 Edge, I have all my stuff headed to the house and it shouldn't be to long before I will be shooting it and just wanted to hear from a few of you guys that have messed with this caliber.

I will post pictures of the build as soon as its done also. Can't wait.

Thanks in advance

[ironheadmike81]

Staying with a .065 jump throughout.
225 accubonds only so far...
I started with 92 grns of H4831 and have worked up to 97 grns so far w/ no pressure signs.
Have also worked H1000 up from 92 grn start to 96 grns so far also no pressure signs yet.
The chrony is coming out next as I am starting to find a few sweet nodes
Almost forgot, gm215m primers for all

[D.ID]

I am running 89.0 grains h1000/300smk/rem/cci/.027 jump/ 2730fps from a 24" shooting .2-.3 moa when I do my part. Out of a FACTORY tube rechambered. I love that gun.

[ironheadmike81]

My new honey is 100 grns Retumbo, again with. 065 jump, 225 grn Accubond, @ 3180 fps.
.2-.3 moa no sweat at 500 yes. Can do better and will soon.