Results 1 to 9 of 9

Thread: 7mm RM + Berger VLD

Hybrid View

Previous Post Previous Post   Next Post Next Post
  1. #1
    mtngun
    Guest

    7mm RM + Berger VLD

    Sorry, wrong forum, can this be moved to Std. cartridges?
    Looking at loading my first batch of 150 gr berger vld for hunting.
    Initially I need to break in the 111 fcns rifle (from Savage Shop w/ 26" med sporter w 9.5 twist and no brake) and the first 20 will be factory loads.
    Being it's a long action and equipped with removable magazine I'm curious as to what overall length I should intially load the round.
    Typically I make contact with the lands and back it off 5 thou. or so. I'm not sure the magazine will allow this.
    I plan to use rutumbo and will start at about 70 gr and work up until I begin noticing pressure. I'm lead to believe the "majic number" is about 72.5 gr.
    Anyone using this setup? Any comments or suggestions will be appreciated.

  2. #2
    Basic Member
    Join Date
    Jan 2007
    Location
    Near Cooperstown, NY
    Posts
    132

    Re: 7mm RM + Berger VLD

    Please post your results. I'd be curious to know?
    "Firearms are second only to the Constitution in importance; they are the peoples' liberty's teeth." ~ George Washington

  3. #3
    tyler.woodard04
    Guest

    Re: 7mm RM + Berger VLD

    you sure you have 150's for the .284 cal? I have loaded and shot 140 and 168 vlds in my 7mm WSM. the 168s are great while the 140's shot ok. need to revisit them for sure. im thinking that you ment 140s in your post. good luck

  4. #4
    Team Savage GaCop's Avatar
    Join Date
    Mar 2007
    Location
    Warner Robins, Ga
    Age
    77
    Posts
    4,979

    Re: 7mm RM + Berger VLD

    150's are the Sierra Match Kings.
    Vietnam Vet, Jun 66 - Dec 67

  5. #5
    mtngun
    Guest

    Re: 7mm RM + Berger VLD

    Sorry for the delay and faulty post. My first attempt and been out of town.
    K, I am loading 168 gr. The 150's are for my 30-06 (hornaday).
    I will be working on it soon, just trying to get a good starting point.
    This is a new rifle/barrel that I ordered from the custom shop (111 fcns with 26" med sporter fluted 9.5 twist target crown and no brake). I intend to break in the barrel with factory loads then dial in with the hand loads. Am I right in assuming there will be no problem using the factory loads for break-in and then moving to hand loads with bullets right at the lands?
    I'd like to get to the range wednesday, yet have not loaded up the bergers yet.

  6. #6
    tyler.woodard04
    Guest

    Re: 7mm RM + Berger VLD

    ok, the bergers do not need to be at the lands. mine shoot best jumped... alot.... about .170" so try different depths. good luck

  7. #7
    mtngun
    Guest

    Re: 7mm RM + Berger VLD

    thank you Tyler,
    I will try various depths and report back. I have a lot of shooting (and cleaning) and loading to do in the next couple weeks.
    This is the first time I have set up a rifle for distance shooting and want to not waste too much time getting started.

  8. #8
    jlwingf
    Guest

    Re: 7mm RM + Berger VLD

    140's top powder is IMR 7828
    162-168 retumbo, rl 25 h-1000

  9. #9
    Team Savage GaCop's Avatar
    Join Date
    Mar 2007
    Location
    Warner Robins, Ga
    Age
    77
    Posts
    4,979

    Re: 7mm RM + Berger VLD

    What is the max length you can seat to and stll fit in the magazine, that is going to be your max OAL.
    Vietnam Vet, Jun 66 - Dec 67

Similar Threads

  1. Berger
    By eddiesindian in forum Ammunition & Reloading
    Replies: 15
    Last Post: 07-12-2015, 10:47 PM
  2. 6.5 140 berger
    By robert d in forum Ammunition & Reloading
    Replies: 13
    Last Post: 07-31-2011, 05:46 PM
  3. 243 win / 95 gr Berger
    By sendero72 in forum Ammunition & Reloading
    Replies: 6
    Last Post: 05-31-2011, 11:13 PM
  4. berger 338
    By schemi in forum Ammunition & Reloading
    Replies: 1
    Last Post: 06-17-2010, 10:37 PM
  5. Berger VLD's
    By lwink in forum Ammunition & Reloading
    Replies: 5
    Last Post: 04-21-2010, 09:47 PM

Members who have read this thread in the last 1 days: 0

There are no members to list at the moment.

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •