just to be sure, what was loose the front action screw or the recoil lug?
Just a tip.
Had my 338-06 Stevens action, a&b barrel, sssupply fluted the barrel and cross fluted the bolt, thank you, with a durramax stock and millet steel bases and rings,shooting 3 shot clover leafs at 100 yds this summer.
Both 215 sierras and 200 grn speers with 61 grains imr 4350. Both shot the same point of impact, both had 3 shot clover leafs. I was happy as a hog in sh_t !
Shot at 200 yds last week and it was shooting high.
Lowered the scope, and my groups started to suffer.
Rechecked the bases, the rings, shot some more, but the groups still were not what they should have been.
I replaced the scope, a Burris 1 1/2 x 6 signature, which I love, with another Burris 1 1/2 x 6 I had on my slug gun.
Sighted it in at 100 yds, groups still were 3" +.
? Was not very happy, not sure of what to check next, I decided to check the front recoil lug, just to make sure, even though I told myself, I never had this be a problem before.
It was loose.
After,
My 3 shot clover leafs were back, I shot a 3 shot 1 1/2" 200 yd group, dead center of the target, cleaned the barrel, and for insurance and my piece of mind shot 2 more at 200 yds.
Both were touching. ;D
So, if your groups go to crap, don't forget about that front action screw, it might save you some lost sleep !
FYI.
Now, I hope to see a mature mule deer buck this coming October in sw Wyoming.
Let him grow, Shoot a doe !
just to be sure, what was loose the front action screw or the recoil lug?
112,223,choate uv,nikon 6-18<br />lrpv,204,hs stock,sightron S3 6-24x50<br />12 target,McGowen 6mmbr,SSS hbr,Sightron S3 8-32<br />Mark II,22lr,thumbhole,Tasco 6-24x40<br />11 youth,243,Simmons 2.5-10x50<br />116fcss 30-06<br />12fv,204,VX-3 4.5-14x50
Interesting,
How much are you tightening your action screws, in lbs?
[B][SIZE=3]Dennis[/SIZE][/B]
See your official Savage Shooters handbook - excuse 112.3, paragraph 4.
Show official scoring target to wife/significant other/banker - barrel is bad - and order a new barrel. :)
...and when you get the rifle fixed, and have this new barrel going to waste, get another action ans start over again!Originally Posted by dcloco
Friends don't let friends use see through scope mounts. No offense.
dcloco and c sam, you guys are troublemakers, heehee.
El Lobo
haha...takes one to recognize one!Originally Posted by ellobo
Those kind of trouble makers I like!
Vietnam Vet, Jun 66 - Dec 67
I agree, troublemaing is good. Especialy in politics. I definately work at it.
El Lobo
Bookmarks