Results 1 to 3 of 3

Thread: Boyds stock w/ centerfeed Issue after barrel swap

  1. #1
    ark1gas
    Guest

    Boyds stock w/ centerfeed Issue after barrel swap


    I just swapped my 22-250 barrel out for a 7-08. I have a Boyds stock and my Savage is a centerfeed model. My problem is the 7-08 rounds won't feed properly. The nose of the bullet makes contact w/ the receiver in the foward motion and causes the head of the case to dip just enough for the bolt to disengage contact and pass over. I never had an issue with the shorter 250 rounds. Anyone got any solutions? Thanks.

  2. #2
    Basic Member
    Join Date
    Dec 2006
    Posts
    3,362

    Re: Boyds stock w/ centerfeed Issue after barrel swap

    The magazines are different. You'll need one for a .308.
    "As long as there's lead in the air....there's still hope.."

  3. #3
    ark1gas
    Guest

    Re: Boyds stock w/ centerfeed Issue after barrel swap

    I thought the magazine was the same for all the shot action cartridges. Thanks

Similar Threads

  1. B-Mag Series: New Boyds Prairie Hunter Stock Issue
    By minderasr in forum Savage & Stevens Rimfire Rifles
    Replies: 7
    Last Post: 08-12-2017, 04:58 PM
  2. Axis II XP Boyds Stock Swap - looking for some help
    By Codylawhorn30 in forum Axis Series Rifles
    Replies: 5
    Last Post: 10-06-2015, 08:19 PM
  3. Help with fit of Boyds stock in Stevens 200 Centerfeed SA Stock
    By redie fredie in forum 110-Series Rifles
    Replies: 8
    Last Post: 02-18-2012, 10:54 PM
  4. Replies: 0
    Last Post: 02-14-2012, 11:16 AM
  5. Tips on boyds stock and centerfeed mag
    By zippy in forum 110-Series Rifles
    Replies: 6
    Last Post: 12-10-2010, 12:55 AM

Members who have read this thread in the last 1 days: 0

There are no members to list at the moment.

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •