Ok so I just finished my build and I go to shoot my rifle. It functions fine it’s just the POI moves for some reason. It’s chambered in 30-06 just fyi, i also check all the screws to be sure they were tight. I don’t know if the combination of all the new stuff makes it act strange or I just suck. Let me know what you guys think I would be grateful
Stevens 200 donor action
Boyd’s Prairie hunter
New never been shot Pac-nor super match
New Pillars and new Devcon bedding
New Talley light weight one piece Rings
New never been shot Zeiss conquest 3-9x40
New never been shot, trimmed and sized and prepped Winchester brass
These where hand loads with 150gr Nosler BT under 50grs of Varget and WW primers

[img width=316 height=450]http://i5.photobucket.com/albums/y169/oOsIcKneSs/target.jpg[/img]
The black spots are paint from my failed attempt at using wheelers cerama bake on paint
[img width=600 height=358]http://i5.photobucket.com/albums/y169/oOsIcKneSs/IMAG0392.jpg[/img]
The barrel nut does not come in contact with the decon under but im thinking i shouldnt have bedded all the way around the recoil lug.
[img width=600 height=358]http://i5.photobucket.com/albums/y169/oOsIcKneSs/IMAG0394.jpg[/img]