I'm in the process of changing a 110 action from 7mm Rem mag to 30-06. I have a 308 bolt head and baffle. My older bolt had the little "nub" inside the bolt body that I had to Dremel out in order for my bolt head to fit. When I inserted the original FP/spring into the bolt body, it protrudes from the 308 bolt head FP hole more than 1/8" and jams in the BH. I believe the shorter shaft on the 308 BH is the reason this is happening as the front nut on the FP does not make contact with the BH shaft (if it indeed is supposed to). Can I readjust the magnum FP to work with the 308 bolt head or do I need to replace the FP and spring?

Tom