Results 1 to 5 of 5

Thread: Savage Model 11 new style bolt disassembly question

  1. #1
    napsac9
    Guest

    Savage Model 11 new style bolt disassembly question


    Model 11 FHNS Bolt Disassembly Question

    Hi Everyone I have the above model I purchased new last year. It is an AccuStock-AccuTrigger-smooth barrel nut model. I want to disassemble the bolt but there is no screw in the cocking piece or anywhere around the bolt handle. Can anyone give me directions how to do it? Thanks Much

  2. #2
    r29l20
    Guest

    Re: Savage Model 11 new style bolt disassembly question

    Remove the bolt and decock it. There is a 1/4 in. allen head in the end of the bolt.

  3. #3
    thomae
    Guest

    Re: Savage Model 11 new style bolt disassembly question

    One way to do it is to leave the bolt in the rifle, make sure it is unloaded, dry fire it, and then use an allen wrench in the hole in the back of the bolt assembly screw.

    Or you can take the bolt out, manually release/decock the firing pin, using the strong wooden edge of a workbench to push against, and then use your allen wrench.

    Usually the first time i disassemble a new bolt, I place it on the carpeted floor and step on the allen wrench as the bolt handle pushes against the floor acting as a stop. After that, I can do it while it is still in the rifle.

  4. #4
    r29l20
    Guest

    Re: Savage Model 11 new style bolt disassembly question

    +1 :)

  5. #5
    napsac9
    Guest

    Re: Savage Model 11 new style bolt disassembly question

    Thanks guys This should have been obvious to me. Thanks Again

Similar Threads

  1. Centerfire: Savage Super Sporter model 40; Bolt Disassembly/Assembly.
    By picking&grinning in forum Vintage Savage/Stevens/Fox Firearms
    Replies: 2
    Last Post: 09-06-2018, 07:45 PM
  2. Model 12 Bolt Disassembly
    By Fotheringill in forum 110-Series Rifles
    Replies: 6
    Last Post: 05-08-2018, 07:46 PM
  3. Article: Savage Model 25 Bolt Assembly/Disassembly
    By Admin in forum Article Discussions
    Replies: 9
    Last Post: 08-28-2017, 01:29 PM
  4. Rimfire: Need help with Bolt Disassembly on a Model 3A
    By scottvt98 in forum Vintage Savage/Stevens/Fox Firearms
    Replies: 1
    Last Post: 05-24-2012, 10:16 PM
  5. Savage Model 25 bolt disassembly
    By riflecrank in forum 110-Series Rifles
    Replies: 0
    Last Post: 11-03-2010, 11:26 PM

Members who have read this thread in the last 1 days: 0

There are no members to list at the moment.

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •