Hello all,
I inherited a Savage 219 in 30-30 cal, still in fair shape considering its been bounced around in a various pickups for the better part of 60 years and didnt look like its been cleaned in a long time. A quick function check revealed a problem. I got it home and cleaned off the grime and put a brush down the barrel. I drifted out the front pin to get the barrel off, and removed the stock.
There was a broken SAFETY PUSHROD. I got a replacement part from the good folks at Numrich.
Question is, do I have to remove the trigger, sear, and block also to get the firing pin out too?
Ive done quite a bit of on line searching and all I can find is the parts diagram. Any advice would be greatly appreciated.

Werbellik