I am at the working up a load stage of my first 2 Savage/Stevens builds....i have noticed that if i bring the bolt back slowly to eject the brass (fired) into my hand, the neck on both rounds seem to get "stuck" in the groove that the bolt rides in on the right side of the action, This is a RH action (10) and thought it's not a big deal, it's a pita to have to palm the bolt back to finish extraction....i know most have concerns with weak extraction, but it seems like it's pushing the case neck to hard against the receiver until it clears the port...maybe just need to move bolt handle quickly, and retrieve brass from the dirt? Thanks for any help,,,rsbhunter