My new build with a question

[DonV]

This is my new build savage 110

22-250 Varmint Barrel
B&C stock
250 lug
Rifle Basix Rifle Trigger
Harris bipod

im still waithin my Scope Base and beding kit

and it all looks good but I have a question on the stock I bought second hand. THe guy opened up the barrell channel too much, and I need to know if there is a way to fix it. Thoughts?

[img width=600 height=450]http://img98.imageshack.us/img98/9485/1dsc04016.jpg[/img]

[img width=600 height=450]http://img29.imageshack.us/img29/8029/1dsc04018.jpg[/img]

[img width=600 height=450]http://img808.imageshack.us/img808/7276/1dsc04015.jpg[/img]




[img width=600 height=450]http://img96.imageshack.us/img96/3228/1dsc04020.jpg[/img]

[dcloco]

If you have bedded the action to the stock, yes. If not, bed just the action/lug/barrel nut area first.

After the above is completed, bed the forend/barrel channel. After bedding is cured (wait a couple days at least), sand the barrel channel to the fit/look you like.

I use a wooden dowel that is the same diamter as the barrel, cut a slot in the dowel the lenght of the dowel, and use 80/100 grit sandpaper to rough in. Swap to 220 grit to finish up.

You can color the bedding compound when mixing or simply paint matte black with a LIGHT coat of paint when the barrel channel has been finished to the fit you wish.