I need some help with a scope mount issue. I have a brand new Savage 10BA rifle from the Law Enforcement series in 308 cal. The rifle comes from the factory with a large rail for mounting a scope and other accessories and as far as I can tell the rail is at 0 moa. I have purchased a Zeiss Conquest 6.5-20x50 scope with the Rapid z1000 reticle. In the scope manual is says that this particular scope should me mounted with a 20moa mount system or you will run out of elevation adjustment. So now what do I do. Is there such a thing as a 20moa mount that will attach to my already existing rail. If not, does anyone have any suggestions. Thanks in advance for your responses.