Results 1 to 18 of 18

Thread: Refinish Birch Stock - Iron Acetate

  1. #1
    Basic Member Buck_Up's Avatar
    Join Date
    Jan 2019
    Location
    Eastern Ontario
    Posts
    39

    Refinish Birch Stock - Iron Acetate


    Decided to do some "old school" refinishing on my 110 Birch stock. Wood staining with Iron Acetate goes back more than a hundred years.
    Birch can be tough to stain, which is likely why Savage used a lacquer with a stain in the lacquer rather than in the wood. Corners become lighter over time, hides the grain, not ideal.

    1) Stripped the old original lacquer stain finish.
    2) Sanded / smoothed old stock, bare birch. The stock was very, very light in color
    3) Made a tannin tea with alcohol, let it steep for 3 days and nights
    4) Made an Iron Acetate stain from vinegar and old iron nails, let it "cook" for 5 days and nights
    5) Applied / soaked the tannin tea into the birch, to add tannins. 5 applications, allowed to dry in between
    6) Dewhiskered the wood with 400 paper
    7) Applied 3 applications of Iron Acetate onto the tannin stained birch
    8) At this point, the stock was fully ebonized, and was completely black
    9) Let is sit for 4 hours
    10) Sanded down the now ebonized wood until the amount of brown/grey/black was what I desired
    11) Applied 10 coats of Tru-Oil, with 24hrs between coats.

    The birch grain popped nicely, and the stain is in the wood, not in the finish.
    This is a hunting rifle, not a showpiece, I am quite pleased with how it came out.



    Last edited by Buck_Up; 03-10-2019 at 11:26 PM. Reason: Updated images with better quality

  2. #2
    Basic Member Robinhood's Avatar
    Join Date
    Apr 2014
    Location
    South Texas
    Age
    66
    Posts
    7,784
    I like it too. Fine job.
    The Dunning-Kruger effect is alive and well.

  3. #3
    Basic Member
    Join Date
    Nov 2014
    Posts
    39
    Great job...looks very nice!

  4. #4
    Basic Member gumbo333's Avatar
    Join Date
    Feb 2014
    Posts
    67
    Buck_up where did you find all the info and recipes/ cooking instructions for this Tannin project? For a hunting rifle you must be very pleased with the outcome. It looks great.

  5. #5
    Basic Member
    Join Date
    Mar 2014
    Location
    SW Pa
    Posts
    37
    Sweet!

  6. #6
    Team Savage
    Join Date
    Dec 2006
    Location
    125 miles North of San Francisco
    Age
    81
    Posts
    1,485
    Going back to the old muzzle loader days of stock/wood finishing. Good job.
    Oz never gave nothing to the Tin Man, that he didn't already have.

  7. #7
    Basic Member Buck_Up's Avatar
    Join Date
    Jan 2019
    Location
    Eastern Ontario
    Posts
    39
    Quote Originally Posted by gumbo333 View Post
    Buck_up where did you find all the info and recipes/ cooking instructions for this Tannin project? For a hunting rifle you must be very pleased with the outcome. It looks great.
    Found all the "ebonizing" info on various woodworking forums. For the Tannin Tea, I didn't have any "tree bark from a rare Amazonian tree" so I simply used 4 Tetley tea bags, steeped in 70% USP Isopropyl alcohol. The stock was literally black as a boot prior to sanding, so the tannin content must be high in Tetley Tea. This was a trial run, I really had nothing to lose, the stock was ugly as he11 prior to starting the work.

    The iron acetate, couldn't be simpler. White vinegar, a bunch of old rusty iron nails, and let it sit for days. I poured it through a coffee filter prior to applying to the wood, to keep any iron or rust bits out.

  8. #8
    Team Savage
    Join Date
    Dec 2006
    Location
    125 miles North of San Francisco
    Age
    81
    Posts
    1,485
    Seems like I read something about steel wool and alcohol working the same way?
    Oz never gave nothing to the Tin Man, that he didn't already have.

  9. #9
    Basic Member Buck_Up's Avatar
    Join Date
    Jan 2019
    Location
    Eastern Ontario
    Posts
    39
    Quote Originally Posted by Nor Cal Mikie View Post
    Seems like I read something about steel wool and alcohol working the same way?
    Steel Wool and vinegar. Only caution, is that steel wool comes with some oil on it. One would have to degrease the steel wool prior to putting into the vinegar, to get good results. That is why I chose iron nails instead of steel wool. Any iron will work.

  10. #10
    Basic Member Coyote_Hunter's Avatar
    Join Date
    Mar 2019
    Location
    6491 feet above sea level
    Posts
    61
    That is a good looking stock!

    Have been thinking about a Boyd laminate for my 111 that is getting a new barrel. Trying to do it cheap, though, as a challenge, and still come out with a good looking rifle. Will probably end up Cerakoting the metal. Refinishing the stock would be a good option, but may go with paint because don't have any that are painted.

  11. #11
    Team Savage
    Join Date
    Dec 2006
    Location
    125 miles North of San Francisco
    Age
    81
    Posts
    1,485
    Also, walnut shells and tree bark. You can come up with some pretty nice colors.
    Even tea bags. No cream or sugar.

    A little Brake Parts Cleaner will get rid on any oil on steel wool.
    Oz never gave nothing to the Tin Man, that he didn't already have.

  12. #12
    Basic Member DesertDug's Avatar
    Join Date
    Jun 2018
    Location
    Texas
    Posts
    432
    thanks for sharing, cool technique.

  13. #13
    Basic Member gumbo333's Avatar
    Join Date
    Feb 2014
    Posts
    67
    Hummmmm, that nice looking stock from some old rusty nails, who would have thunk it.

  14. #14
    Basic Member
    Join Date
    Jan 2015
    Location
    Austin
    Posts
    1,711
    I had one that looked very similar, years ago. Was out hunting and leaned it up against the old tree to take a leak, when I turned around to pick it up, it was gone.

    Blended in so well, I couldn't see it.

    Moral, don't lean your beautiful old skills shoot'n iron up against a tree.
    Banning a gun will not solve what is a mental health crisis inflamed by incendiary rhetoric on social and television media. The first amendment in this case is less precious and more likely the causal factor than the second amendment.

  15. #15
    Basic Member
    Join Date
    Jun 2009
    Posts
    286
    Nice!

    Three44s

  16. #16
    Basic Member
    Join Date
    Aug 2017
    Location
    South Texas
    Age
    47
    Posts
    24
    That's beautiful!

    Sent from my KYOCERA-E6820 using Tapatalk

  17. #17
    Team Savage GaCop's Avatar
    Join Date
    Mar 2007
    Location
    Warner Robins, Ga
    Age
    77
    Posts
    4,983
    You did some fine work on that stock!
    Vietnam Vet, Jun 66 - Dec 67

  18. #18
    Basic Member
    Join Date
    Mar 2018
    Location
    NJ
    Posts
    101
    That's one heck of a beautiful looking stock.

    David

    Sent from my moto g(6) play using Tapatalk

Similar Threads

  1. The birch Axis stock from Boyds
    By OldDog in forum Axis Series Rifles
    Replies: 4
    Last Post: 02-03-2018, 10:46 PM
  2. Long Action SF Stock refinish
    By ninner in forum 110-Series Rifles
    Replies: 3
    Last Post: 01-10-2017, 08:12 AM
  3. 110E pressed stock checkering refinish
    By skamondongo in forum 110-Series Rifles
    Replies: 3
    Last Post: 04-20-2015, 09:13 PM
  4. Replies: 0
    Last Post: 12-25-2013, 02:31 AM
  5. Walnut or Birch stock for my Savage 10FP .223 SA
    By Gunnyhiway in forum 110-Series Rifles
    Replies: 4
    Last Post: 08-26-2010, 04:42 PM

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •