chromatica,
We currently offer the 260 Rem with a 1-8" twist. check out www.mcgowenoutlet.com for on hand inventory.
Dan
chromatica,
We currently offer the 260 Rem with a 1-8" twist. check out www.mcgowenoutlet.com for on hand inventory.
Dan
JohnAC,
We've not had a lot of requests for the 25 calibers, but after reading all of these posts requesting them I'm going to initiate a production order for some 25 caliber blanks. Once I have the blanks on hand, the turnaround is much quicker than starting one from the beginning.
Dan
Guys,
You have spoken! We typically keep some 6mm, 6.5, 7mm, 30 caliber and 338 caliber stainless blanks on hand for quick turn/rush orders. I'm going to initiate a production/inventory order for the floor to make some more. I'll also talk to the McGowen Outlet webmaster and have him add some sporter weight barrels into their order system. What I'll do with these blanks is turn the majority of them to either varmint or bull contours and standard/small shank threading. If you order a barrel in a Savage Sporter or Magnum contour, or frankly any contour that we offer in our Contouring page, we should be able to easily recontour them into the contour that you desire. Keep in mind that the contours on our Contouring page show a larger diameter shank than what is standard on any shank size Savage. The contour is modified to work with your shank size. Once we have those blanks in stock, the Outlet webmaster will make the ordering of them active, so all you'll have to do is choose your shank size, contour, length, crown, finish, rifling twist and chambering. The chamber reamers that we currently carry are listed on our website, you can go to "Barrels" - Chrome Moly Barrels and scroll down the page to the caliber that you are interested in and it will show the rifling twists we offer as well as the chamberings that we offer. We're adding more reamers all the time, so if you don't see it, ask as we may already have it.
I'll ask again, how about a "benchrest special", a 21" or 22" varmint contour, 14" twist, 6mmBR for those of us who would like to dabble around in short-range VFS matches without breaking the bank? Think of how McGowen's reputation would be bolstered if a few of us actually started beating some of the guys with the high $ rigs. Edit: preferably available in both large and small shanks. And with a shorter throat than the Norma, so that it would work with shorter lighter bullets.
I would like to see McGowen #3 contour, 24 in. barrel in the standard calibers, (2506) many barrel makers neglect the mid weight barrels, and these make the nicest packing guns, as a light sporter isn't heavy enough. I need one in a 3006 SPR. 1/10 twist
6.5/300WSM would be nice!
How about a 16.5" 1/8 twist .300 Blackout threaded upfront for a 5/8-24 suppressor? In a light varmint or varmint contour.
If I had a half dozen of them I could sell them right now.
257wsm, 25-06ai
How about the .284 AI or .284 Shehane in 1:9 or greater twists, medium to heavy contours, for 180 VLD's like Berger?
6xc ! Is the cut rifling going yet?
Can we get a 25-06 with a 1 in 9 twist instead of the standard 1 in 10?
I'd like a 6mm SLR in large shank 26" varmint contour
20" 6MM DASHER threaded 5/8 x 24
223 ackley with a 20-22" length varmint contour
Would just like to see the 280 Ackley I ordered seems like months ago.
I would like to see 35Whelen and 35Whelen Ack Imp in 26" light varmint taper. 6XC 1/7.5 or 1/8 twist 28" varmint
6.5x06 1/8 twist Light varmint 26" & 28" Also in 6.5x06 Ack Imp same length. 257Roberts, 6.5TCU 1/8 22" 24" 7MM BR 7MM STW 7TCU, 7x57 Mauser 8MMx06, 338 Excalibur, 338 Federal, 338 Rem Ultra Mag, 338x06, 9.3x62 Mauser
30-06, 22", 1:11 twist, medium varmint or light palma, stainless, threaded and fluted. My goal with this barrel is to build a lighter hunting rifle but with something only slightly heavier than the standard sporter barrel profile. Needs to be something I can hang a suppressor off of. I'm sure you get the point.
Thanks for collecting the voice of the customer.