cant wait to see some pics on these stocks.if it works ill be booked solid.
Printable View
cant wait to see some pics on these stocks.if it works ill be booked solid.
savagebuilder is this what you were looking for?
Sorry the pics aren't very good, used my cell phone....
NOTE: All finished pictures are of my 25-06 and the raw pic's are a work in progress
Raw Left Side Shows how rough they might ship to you
http://www.nettally.com/kwd/Savage/1LeftSide.JPG
Raw Left Side
http://www.nettally.com/kwd/Savage/2LeftSide.JPG
Raw Left Side Butt again Shows how rough they might ship to you
http://www.nettally.com/kwd/Savage/2LeftSideButt.JPG
Raw Inlet area showing Wood Plugs I have installed
http://www.nettally.com/kwd/Savage/BareStock1.JPG
Raw Inlet area
http://www.nettally.com/kwd/Savage/BareStock3.JPG
Bedding - NO - Pillers
http://www.nettally.com/kwd/Savage/BeddingNOPillers.JPG
Finished - WITH - Pillers
http://www.nettally.com/kwd/Savage/FinishedPillers.JPG
Finished Bottom - they do have a NICE palm swell on them
http://www.nettally.com/kwd/Savage/FinishedBottom2.JPG
Finished Bottom
http://www.nettally.com/kwd/Savage/FinishedBottom.JPG
Finished Right Side Can't really see it, but they do have a NICE palm swell on them
http://www.nettally.com/kwd/Savage/F...dRightSide.JPG
They do shoot well also...If I could do my job!!!
25-06 3 shot groups:
http://www.nettally.com/kwd/Savage/25-06a.JPG
http://www.nettally.com/kwd/Savage/25-06b.JPG
...
Nicely done on the wood stock. When are you coming down to do a few of mine?...
Or you want I should send them to you?
Looks good. nice shooting, too.
How many hours do I have I the stock???
Nobody & I mean nobody can screw up a piece of wood like me. Many have tried. Probably the reason I always stayed with electrical & concrete.
Just pulling yours & my fellow Flordian's (fl9-40) chain a bit.
Besides, I've grown quite accustomed to the plastic "flex - o - matic stock. We've learned to compliment each other....
Still, nice work.
Which trigger guard is that?
Sent from my AT100 using Tapatalk 2
Its from Numrich where we get the stocks from
https://www.gunpartscorp.com/Products/539680.htm
I can't wait to try this when I get home in august. I've been planning it out daily while I'm away. I might order two because I really want to fit a DBM kit on it from legacy sports, but since I've never done a stock before might just keep it simple on the first try. For some reason I just want to make this Axis a real shooter. Hopefully I'll have pictures to post come September.
Sent from my HTCEVOV4G using Tapatalk 2
FLA9-40 did you install the pillars before or after the glass bedding?
Sent from my AT100 using Tapatalk 2
Did it as part of the bedding process. I trimmed them to length then bed them and the action. Worked out real well, just put a light coat of grease where the actions screws go through so as not to cement the screws in.
Release agent on the action, barrel and action screws. I used clear shoe polish, can NOT be used sparingly or you will have a surprise when you go to remove the action and barrel to inspect your work 24hrs later!! I put two coats on all parts.