http://i1207.photobucket.com/albums/...1/DSCN3029.jpg
My 243 digital striker. Paint is Duracoat. Scope a 4x12 Nikon Prostaff BDC.
Printable View
http://i1207.photobucket.com/albums/...1/DSCN3029.jpg
My 243 digital striker. Paint is Duracoat. Scope a 4x12 Nikon Prostaff BDC.
Wow, that took some time
Time and alot of tape.
Nice paint job on the Stiker!! And thanks for reminding me where my other short bipod is=Its on the Stiker.......Was looking all over for it last weekend but forgot to check the violin case that hold the Stiker.
My 22 mag digital camo and daughters new cub in tiger stripe camo.
http://i1207.photobucket.com/albums/...1/DSCN3090.jpg
hey guys. got some nice looking rigs here!!
new to the site but not shooting, hunting or savages!!!
Here is my first build. short action large shank sporter action. Kreiger #5.5 fluted 9 twist finished at 26.5 7mm WSM in metalist stock. bedded, trigger worked. nikon 4-16 monarch mil-dot - shot a black bear 27th of may first blood with it. 168 VLD bullets shoot .3's
http://i198.photobucket.com/albums/a...f/IMG_0077.jpg
http://i198.photobucket.com/albums/a...f/IMG_0076.jpg
this was my next project. started as a .243 center grip. bought it as a 6BRX center grip with 10 rounds down 8 twist kreiger. changed it to a tonys rear grip and rifle basix trigger. also bedded with 4-16 monarch and soon a mini muscle brake. shoots amazing. shot a deer at 496 last year with it! amazing. 95 VLD at 2775 with 16" barrel
http://i198.photobucket.com/albums/a...X/IMG_0080.jpg
this is my ML-II that I just changed over to a houge stock. trigger worked. great gun nikon 3-9 omega
above it is my latest project. a striker started as 7mm-08. now has .50 ML-II barrel shortened to 16". custom plug takes 45 ACP case. shoots 250 SST at over 1900 FPS. cant wait till deer season with this!!!
http://i198.photobucket.com/albums/a...f/IMG_0078.jpg
All have been dura coated ultra flat black. hope you like
New PREDATOR Max. Not a round through it, (.243) Coated the metal with Duracoat, Shake n' Spray. It's supposed to be Magpul Flat dark Earth, but it seems a tad light. I am happy with it! Thanks for looking!
BSA 4-16 Mil dot scope, and a Burris Fast Fire II for the close ones!
This first pic is the closest to the actual colors.
http://img.photobucket.com/albums/v5...4/IMAG0035.jpg
http://img.photobucket.com/albums/v5.../IMAG00122.jpg
http://img.photobucket.com/albums/v5.../IMAG00172.jpg
Looks good with a tad of contrast !
Hello everyone. I'm new to this forum even though I've been shooting a Savage since 1959. I have Remingtons and Brownings, but for serious shooting I always drag out a Savage or two. This is one.
Older Savage 110 in 30-06. Boyds stock, Tasco target scope.
http://i1217.photobucket.com/albums/...1414/30-06.jpg
This is what it will do when I'm up to it
http://i1217.photobucket.com/albums/...1414/group.jpg
OldGold, that's some damn fine shootin"! :o very nice rifle too!
Here is Jazmine in her latest configuration... soon to be changing again, I am sure. She sports a Manners MCS-T right now, but I have a MCS-T3 with the Manners GAP molded in coloring coming soon. She also has the new SWFA 5-20SS scope on top. I love the scope, and I love the stock, but I am always doing other stuff to her. I doubt she will ever be truly complete!!
DK
Sittin pretty in the early morning sun... giving the steel plates total fits!!
http://i187.photobucket.com/albums/x...8/IMAG0161.jpg
Post a few pics.
First up, after moving to Montana and then moving back to Nebraska, I had to build a new reloading bench. This is just the beginning. There is a full frame under it and cross braces added. I still have to add more drawers on the left and the right of the lower main drawer set.
http://img.photobucket.com/albums/v2...oco/BenchA.jpg
Bedding a stock after drying. I like to use clay and Mother's carnuba car wax.
http://img.photobucket.com/albums/v2...fleBedding.jpg
Fireforming some Armscor brass in a 223 AI that I built from scratch.
http://img.photobucket.com/albums/v2...FF52grHPBT.jpg
http://img.photobucket.com/albums/v2...orFF50grVM.jpg
Picked up this 110LE in 223 at a gunshow in Montana.
http://img.photobucket.com/albums/v2...ge110LE223.jpg
110 action I picked up on this site and a 30/06 McGowen barrel. Scope on this rifle is a Burris law enforcement version. Older scope...probably 20 years. Has BDC circles in varying size to help in identifying range of two legged monsters.
http://img.photobucket.com/albums/v2...1103006McG.jpg
Small group photo of some rifles that lived with me in my hotel room in Montana for 8 months. Top to bottom: 223 AI, 222 Magnum AI (super duece), 223 AI, 223 AI (bvss stock), 110 Savage in 7mm Magnum, 6mm AI built on Stevens action, and 223 AI in B & C Medalist stock.
http://img.photobucket.com/albums/v2...o/IMG00547.jpg
338 Rum built on a Savage Target action. 32" Rock Creek barrel.
http://img.photobucket.com/albums/v2...o/338RUMSc.jpg
6.5x55 AI built on a single shot Savage 110 long action with Rock Creek barrel.
http://img.photobucket.com/albums/v2...o/65x55AIA.jpg
22/6mm AI built on a Savage LBRP Target action wearing a Leupold VX3.
http://img.photobucket.com/albums/v2...ge226mmAI5.jpg
My younger brother on the right, holding my single shot, long action, 112FV-S in 223 on a prairie dog safari in Montana. Lewis & Clark travelled through this area. Marias River is about a mile behind this spotter/shooter combo.
http://img.photobucket.com/albums/v2...fenceline2.jpg
http://i174.photobucket.com/albums/w...520111414a.jpg
http://i174.photobucket.com/albums/w...620111551b.jpg
http://i174.photobucket.com/albums/w...620111551a.jpg
http://i174.photobucket.com/albums/w...s/00940021.jpg
http://i174.photobucket.com/albums/w...s/00940023.jpg
Chambered in 300 Venom Magnum MS
Like the paint on the stock. Are the skulls airbrushed on? If so who did it?
The stock was dipped by a local shop.... all his information is on my web-site. I would but post it here, but I want to follow the rules. If you like I am on Facebook under Lyndon F Combs. Message me there I will pass along the address. He is really reasonable.... He also did the rifle in the pics below... both are a Reaper pattern..
http://i174.photobucket.com/albums/w...504111241a.jpg
http://i174.photobucket.com/albums/w...504111308a.jpg
Savage MKII BV with Boyds Evo stock, DIP rail, trigger guard and heavy mag plate. Nikon Buckmasters 4.5-14X40
http://i999.photobucket.com/albums/a...r-1/005-19.jpg
Making some progress on my WSM went from this:
http://i156.photobucket.com/albums/t...0207011936.jpg
http://i156.photobucket.com/albums/t...99/Krieger.jpg
To this:
http://i156.photobucket.com/albums/t...9/PICT0237.jpg
STEVENS 200
ER SHAW 25-06 BARREL
BOYD LAM. STOCK
LEUPOLD WITH STONEY POINT KNOBS
OVERSIZED BOLT HANDLE
CALDWELL PIVOT BIPOD
http://i483.photobucket.com/albums/r.../Photo0752.jpg
Savage model 10 20 inch barrel Duramaxx stock .308
http://i999.photobucket.com/albums/a...h_DSCN1261.jpg
Before
http://i999.photobucket.com/albums/a...avagestock.jpg
After
http://i999.photobucket.com/albums/a...gepainted1.jpg
http://i999.photobucket.com/albums/a...gepainted2.jpg
Heres my 12. Got a manners t4a on order and the barrel should be here soon:).
http://i1191.photobucket.com/albums/...DSC_0037-1.jpg
Here is my Beater, I just finished Parkerizing the Receiver, bolt handle and ring thing on the bolt. The park looks like garbage but I didn’t have an area to sand blast so I used evaporust…not the best but it worked to some extent.
Boyd’s Prairie hunter
Pac-Nor #4 24” 1x11 chambered 30-06
SS bolt flute
Zeiss Conquest 3-9x40 in the safe
Talley Light weight mounts in the mail
Sorry for crappy Cell pics... the Dslr is with the wify
http://i5.photobucket.com/albums/y16...neSs/bolt4.jpg
http://i5.photobucket.com/albums/y16...neSs/bolt3.jpg
http://i5.photobucket.com/albums/y16...KneSs/bol1.jpg
http://i5.photobucket.com/albums/y16...neSs/bolt2.jpg
First time posting here. This is the Savage model 12 BJTV 26" in .223. The rifle is topped with a Leupold VX II 4-12x40 AO scope. (very clear optics) First time out to the range with this one today. Best group at 100 yds, 10 shots into 3/4 inch using 69 grain SMK pushed along with 24.7 grains of W748. I was breaking in the barrel at the same time....(cleaning after every shot) so I know the rifle will do better once I "tweak" the load and cleanup the case necks (turn case necks just enough to cut away any thick spots). Any one else have this model. I would love to know what bullet weight and load you settled on...(lightweight bullets 40-52 grain grouped about 1 inch....."I guess the 1-9 rate of twist").....But I see potential for the heavier bullets..........Don in SC
http://i991.photobucket.com/albums/a...s/101_5474.jpg
http://i991.photobucket.com/albums/a...101_5482-1.jpg
http://i991.photobucket.com/albums/a...s/101_5485.jpg
Hey HeavyBarrel... (here is mine)
http://i56.tinypic.com/2cpeqdy.jpg
...and a recent pic of my last target (earlier today actually). 5 rounds - using Federal Premium Gold Medal Match 69gr SMK BTHP...
http://i51.tinypic.com/2gxiwsy.jpg
After a 4 week wait on my new boyds to get shipped to New Zealand, it's finally here! I'm pretty happy with it but because I pack this thing around the wilderness I'll be lightening it a bit.
Haven't shot it yet, I'll see how it goes as is but eventually it'll get bedded (once the recoil lug gets here).
http://i150.photobucket.com/albums/s...y/S1020039.jpg
http://i150.photobucket.com/albums/s...y/S1020035.jpg
Here is a picture of my new baby i got last week!
Savage Stevens 200 in 223 Remington
http://www.shooterscalculator.com/im...gton-small.jpg
Just finished this one this morning.
http://i66.photobucket.com/albums/h2.../260001JPG.jpg
Savage short action
26" 8 twist .260 Criterion
B&C stock
10x SS and SS rings
Weaver 20 min base
Eagle stock pack
Form 1 suppressor
Here's my latest.
Savage Model 12 Single shot action, Krieger 29" barrel chambered in 6CM
Savage F/Class stock modified to fit a short action with adj cheek and bottom milled to ride the rear bag better and DuraCoat paint. Pillar and glass bedded with Devcon plastic steel, Farrell 20MOA base, Leupold QRW rings and a
Super Sniper HD 5-20 scope.
http://img830.imageshack.us/img830/3613/6cmf.jpg
http://img834.imageshack.us/img834/9259/p1000887e.jpg
Here's my 2nd Savage (model 12 VLP in .243 win)
http://i52.tinypic.com/iba0ck.jpg
Hi how do you upload an image to this fourm
go back to the 4th sticky......PICTURE POSTING 101.
http://img.photobucket.com/albums/v3...9/PA240004.jpg
Savage Mod. 12 FS Fluted
Hawke 4-10x44 Mildot
Burris Signature Zee Rings
Gunworks Maximus suppressor
soon to be fitted with a Duramaxx stock if I can get one into NZ.
I see two suppressors on guns above.
Tell us your likes/dislikes and is the suppressor worth it!
Just wonderng, I do a little pig hunting at night!
The rifle used for long range shooting & long range hunting "mainly for them Texas Hogs"
Savage 110E Action: Accurized (receiv faced / bolt-thread, trued bolt body & locking lugs, oversized parallel ground recoil lug
#4 26” 1-10 twist Hart Barrel chambered in 7mm Rem Mag w/ JP Recoil Eliminator Break
Boyd “Ross Thumbhole Stock”, accurized "bedded"
Timney Trigger 2.5 lb
Over-sized Tactical Bolt Knob,
Vortex Viper 1“ tube 4x12x40 side focus w/ Custom Turrets
Burris Extreme Tactical 1” Rings w/ Picatinny Ring Top
Vortex 1” Anti Cant Rifle Scope Bubble Level
EGW Tactical Picatinny Rail Scope Mount Base
3” Under Stock Picatinny Rail w/ UTG Low Profile Tactical Bi Pod 6” to 9”
Metal Finish, Gun Kote Matte Black
Camo on stock: Urban Tactical
Gun work done by Rob Roberts Custom Gunworks, stock & all metal finish work finish by me.
Ammo
Conley Precision Cartridges
7mm Remington Mag. 140 Gr. Nosler AccuBond 3225fps
http://i2.photobucket.com/albums/y19...icture8951.jpg
http://i2.photobucket.com/albums/y19...icture8674.jpg
http://i112.photobucket.com/albums/n...3/IMAG0291.jpg
Savage 93R17FV .17 HMR
Mueller APV 4.5-14X40
Weaver #16 bases
1" Burris medium "Zee" rings
http://i112.photobucket.com/albums/n...3/IMAG0203.jpg
200 Stevens .270
Nikon Prostaff 3-9X40
Burris standard bases
Leupold 1" extension rings
New to the forum, but not new to Savage. Here are a couple pics:
Savage Axis .223
http://i990.photobucket.com/albums/a.../Photo0657.jpg
Savage Axis .223 (Top - before paintjob), Savage Mod 11 .308
http://i990.photobucket.com/albums/a.../Photo0617.jpg
Well this build is complete for now :-\ 12FVSS .308 26" , Viper PST 6-24X50 FFP MOA, Burris rings, EGW 20moa Base, SSS Competition trigger 2lb 10oz, SSS bolt handle raw cast, XLR Stock w/ bench rest plate, AICS 5rnd mags.
http://i1183.photobucket.com/albums/...a/SDC10097.jpg
http://i1183.photobucket.com/albums/...a/SDC10096.jpg
Seems i need to update, Ive gotten a few more in the safe since this was started.
This one showed last year. 10fpk in 308.
http://img.photobucket.com/albums/v2...IMAG0150-1.jpg
http://img.photobucket.com/albums/v2...oundhoggun.jpg
Then this one decided to show and give the 308 some company.
6mmbr
http://img.photobucket.com/albums/v288/ninedv/pair.jpg
http://img.photobucket.com/albums/v288/ninedv/6br.jpg
Still working on load development: 5 shot
http://img.photobucket.com/albums/v2...dv/5hot6br.jpg
And all three before the Br got its rings on her.
http://img.photobucket.com/albums/v288/ninedv/group.jpg
Shoot straight.
After waiting several months for things to come together, I am finally finished with my FIRST ever complete BUILD!
Savage PTA RBLP action, T&T by SSS, SSS evolution 5oz trigger.
SSS Benchrest stock, with 18 coats of automotive clear to compliment the stain!
McGowen 27" 308 1" to .900" tapered matte barrel, 10 twist
It will have a Nightfore base and rings, sporting a 12x42 BR NP2DD scope!
Many thanks go to Fred & Lisa-SSS, McGowen Barrels, Patrick Kennedy, Randall Nall, and Chris from Sport Optics!
I actually fired it and it WORKED! Setting headspace was a breeze, 1/8 twist until it wouldn't close, tweaked, locked down, put no guage in and bolt wouldn't close! EASY
http://i957.photobucket.com/albums/a...7/DSC07056.jpg
http://i957.photobucket.com/albums/a...7/DSC07053.jpg
http://i957.photobucket.com/albums/a...7/DSC07052.jpg
http://i957.photobucket.com/albums/a...7/DSC07057.jpg
http://i957.photobucket.com/albums/a...7/DSC07055.jpg
Dennis, that is one sweet looking rig; I just might use that color scheme for my next build. 8)
The clear I used really brought the colors out! I didn't even expect the outcome!
Well this is my SAVAGE rifle.
Savage 12 Action RBLP
CBI 28" Bull
Night Force 8 x 32 x 56
Shenhan Tracker Stock
Steel Bedded by "Hook Boutin"
130 gr Bergers VLD
40.7 gr H4350
CCI450's
2875fps
.020 Off Lands
http://i1103.photobucket.com/albums/...967/65x47l.jpg
http://i1103.photobucket.com/albums/...5shotgroup.jpg
http://i1103.photobucket.com/albums/...e1967/hook.jpg
This is a rifle my Son and I built together, one of many I have built in the last few years.
It is a Mod. 12 T&T action with a SSS bolt handle and jeweled body, also a Medalist stock with a paint job by a local body shop. The barrel is a Criterion 26 inch 6MMBR from JIm and a SS recoil lug. It seems to want to shot really well as with only 17 shots through it we had a 5 shot group that was 4 in one hole and 1 about 1/4 inch out at 100yds.
http://i613.photobucket.com/albums/t...T/100_0266.jpg
Here is another picture, I haven't learned how to size them yet.
http://i613.photobucket.com/albums/t...T/100_0264.jpg
Here is the most recent build I did for myself it is a 20 inch McGowen 223 heavy barrel and the stock is also from a site member. The gun will shoot a lot better than I can hold it .
http://i613.photobucket.com/albums/t...T/100_0262.jpg
i miss that 223 barrel..........love the looks of that blue medalist.
http://i830.photobucket.com/albums/z...t/Socom011.jpg
Click vvvvvvvvvvvvvvvvvvvvvvvvvv
http://i830.photobucket.com/albums/z...h_800yd011.jpg
Click vvvvvvvvvvvvvvvvvvvvvvvvvv
http://i830.photobucket.com/albums/z...h_500yd011.jpg
Here is my new (to me) LRPV.... God it feels so sweet and I love the HS Precision stock. ;D
http://i40.tinypic.com/14scj11.jpg
Striker re-do. Matched up the new scope, new barrel, bolt, and bi-pod. 30 Bellm with a 17" barrel and a 3x9 Nikon BDC. Dura coat paint used.
http://i1207.photobucket.com/albums/...1/DSCN3555.jpg
Striker? What Striker?
Very nice paint job.
Larry
Tinkerer