....
Printable View
....
....
It's a .300wm. The build process has been documented in the build section if you'd like full details.
As for the stock, I'm 99% sure that it's a Boyd's Heritage Stock (or some variation thereof). I bought it second hand on here, however, and there aren't any markings on it so I can't say for certain. It's definitely their pepper laminate finish, and it certainly looks like the Heritage in all the pictures I've been able to find, but I can't say for certain. It's been cut and inletted and stained and finished probably 10 times over at this point, but I'm super happy with the fit and finish of it. Again, if you'd like more details, check out my build thread 'Couple of ELR builds.'
nice rifles
OK last one I promise:
https://farm2.staticflickr.com/1599/...a3afc267_b.jpg
http://uploads.tapatalk-cdn.com/2016...ebf80b46a1.jpg
http://uploads.tapatalk-cdn.com/2016...7a1c559ed3.jpg
Here's my ARC M5 redone in a McMillan A5.
Swapped from the XLR Element Chassis to the A5 and upgraded to a Timney Calvin Elite 2 stages with an 8oz first and 1lb 2nd stage.
Still running 243Win, but went back to the 115DTACs at 3015fps they stomp the AMAXs in the wind.
I took a 4th place finish in the local SoCal Precision Rifle Team Match over the weekend with it. A few things were learned and will be applied in the future to clean up a few more points. I walked away with a new hat though lol!
Nice, LW. How much does that thing weigh w/ the Razor Gen II?
Going to come up north for the TRBC match?
Unfortunately no. Do to a pending move to the East Coast this summer I probably won't get to shoot any more big matches until next year. Once I get set up in NC though I should be able to get more involved than I have been out here.
The newest member to my savage family. Its a savage 111 action with tactical bolt handle mated to a Mcree Chassis supported on a harris bipod. Caliber is a 300 Win mag spiraling thru a Shilen Match 26" barrel threaded and ready for my Silencer tech Suppressor. The backend is a Magpul PRS folding butt stock with an accushot monopod. The glass is a Vortex Viper 6x24x50 Mildot reticle held by Seekins Precision rings on a magnum 20moa EGW rail.
http://i90.photobucket.com/albums/k2...165046%202.jpg
Outstanding , looks great!!!!!!!!!!!!!!!
Savage 10 FCP-HS / CDI bottom metal with AI mags / Leupold Mark 4 E/RT 8.5-25x 50mm / Warne steel rings and base / Bradley cheek rest / Atlas PSR bipod
http://i426.photobucket.com/albums/p...dbb3b97c21.jpg
http://i426.photobucket.com/albums/p...f7d1e2fe32.jpg
First 3 shot group at 300 yards (Fed GMM 168 SMK)
http://i426.photobucket.com/albums/p...9f04228680.jpg
Load development at 100 yards (3 shot groups) I thought they may be flukes but confirmed them in all three rounds at sub 1/4 moa. Original measurements done at the range with a ruler, corrected later at home with calipers. Varget and H4895 were sub 1/2 moa no better than factory GMM.
http://i426.photobucket.com/albums/p...58c8a1ec83.jpg
remeasured with calipers at .190"
http://i426.photobucket.com/albums/p...1799f248e5.jpg
remeasures with calipers at .150"
Cheers,
Bobby
Outstanding! Beautiful looking rifle and bench!
Though I must point out that I believe your bipod is on backwards good sir. Unless of course that's the way you wanted it, even though Harris' weren't meant to be put on backwards. With Atlas it doesn't really matter because the legs can be pinned both ways - just comes down to personal preference. But the Harris legs only retract one way.
Stunning rifle. How far is she pushing that out to?
Uncle H... your wife's Model 10 looks good enough to be in a car show....and get best of show!
Uncle H....your wife's rifle looks good enough to be in a car show......it would get best of show!
http://i1084.photobucket.com/albums/...424_192549.jpg.
New guy checking in. 6.5 Creedmoor 10FCP-SR
http://i1084.photobucket.com/albums/..._171618199.jpg
http://i1084.photobucket.com/albums/..._181301040.jpg
Special order through my FFL, Savage quoted 6 weeks. Got it in 3!!!
http://i1084.photobucket.com/albums/..._194437515.jpg
First three shot group after zero with factory ammo. Hornady 140g ELD-M
I have H4350 and IMR4451/ 140g ELD-M and 140g Berger Hybrid to start load development.
What size are those squares?
Looks like 1 inch given the group size and range. But that's guessing.
Each square is .5", 1"center in the white.
Really, wow, nice shooting.
Thanks. I need to bed the recoil lug area on the B&C and lighten the accutrigger a bit.
Anyone have an opinion on bedding the B&C? The recoil recess is much larger than the stock accustock lug.The lug is making contact with the rear of the recess only.
Here is my 22-250 I just finished. It started out as a Cabelas 12 FV and it's now wearing a FCP-SR stock. I had the barrel threaded for my Saker muzzle brake, then installed a thick recoil lug, steel pic rail, and topped it off with a Burris XTR II 5-25x50 in a AI mount.http://i1369.photobucket.com/albums/...psz4qkm51b.jpg
Since RatMag is reposting his. Here's mine after having Longrifles, Inc do a Graphite Black Cerakote job on my Mausingfield action.
Just swapped barrels as well.
Another 8 twist XCaliber 243Win.
Spun up by Jim at Apache Gun Works
112rds on the barrel and took home a 2nd place finish in a Long Range Steel Match with the NCSA Highpower Club. In Pala, California.
38 shooters participated working targets between 200-900yds. I got beat by 1 point due to 2 bad wind calls on my part, but it was a very fun match. Targets ranged in size from 3/4moa to about 2moa and I think a couple were a little bigger, but used for the timed target transition stages. They had us shoot from one end of the range to the other on the clock with multiple distances up and down the hill. Also had some pretty heavy wind angle changes along with the 15-20mph winds.
I finished with 33 out of 40 points and the winner had 34.
Here's the rifle.
http://uploads.tapatalk-cdn.com/2016...d522426bb4.jpg
http://uploads.tapatalk-cdn.com/2016...f1983f7363.jpg
Vortex Gen ii Razor 4.5-27x56
ARC Medium Rings
ARC 30MOA rail
ARC Mausingfield Action (The M5)
D.D. Ross Bolt Knob
AGW XCaliber 8 Twist
APA Lil ******* Muzzle Brake
Shooting 115DTACs at 3070fps
McMillan A5
Surgeon Bottom Metal
Timney Calvin Elite 2 Stage
Harris Bipod with PASS adapters
Accurate Mag with CORE +2
All sitting on a SLIK tripod in the Garage waiting to go out to the range this weekend.
LoneWolf what length is your new barrel?
26" Heavy Varmint Contour. Muzzle brake takes it to about 29". Rig weighs in at 17lbs unloaded.
Well, this one isn't a repost of a previous rifle. She is all brand new with only a few rounds down the tube. Savage Predator .243Win, all snuggled up inside a new KRG 180 Alpha chassis!! I shot my last match on Saturday, with absolutely horrible wind and rain, and managed to snag 2nd Place as well, by only 1 hit. Well, 1 more hit would have tied me with 1st, and 2 hits to win it all!! Nice rig Wolf!!
DK
http://i187.photobucket.com/albums/x...psuummptju.jpg
"THE MONEY PIT"
surgeon 591
mcmillan A5 devcon bedded
surgeon bottom metal
24" 4 grove krieger
JP enterprise recoil eliminator
jewell HVR set to 1.5lbs
vortex Gen2 EBR-2C MOA
ARC M10 rings
harris 9-13" bipod W/CORE pic rail adapter...
http://i1239.photobucket.com/albums/...1463449087.jpg
http://i1239.photobucket.com/albums/...1463449091.jpg
http://i1239.photobucket.com/albums/...1463449094.jpg
Nice LR. I really like the Cerakote job. Complements the stock.
Thanks rbp...I was tired of the EBR look so decided to go with a light color build.
hafe I've gotta get get over the sticker shock of all this first lol! This has been a pretty expensive build with all the do overs...maybe the end of the year.
And the bipod is black now...I bought a new Harris today.
yes...the tan just wasnt working for me LOL!! and sense i had it tore apart last week having the smith open up the AW cut in the bottom of the action i had it re-coated...the bipod was the last thing with it...for now... plus the bipod was off my other rifle...
before....
http://i1239.photobucket.com/albums/...1460928871.jpg
last pics....i found out yesterday just how bad i am at positional shooting...i fried 6 rounds off the barricade and then just went prone...i practiced dry firing when i got home and found some pretty good stances so now i just need to keep practicing holding steady off the barricade....
http://i1239.photobucket.com/albums/...1463936772.jpg
http://i1239.photobucket.com/albums/...1463936818.jpg
http://i1239.photobucket.com/albums/...1463936792.jpg
Yes nice job.
Sent from my SM-G920V using Tapatalk
Built this Savage 110 flatback in .308 about 5 years ago with the help of this forum. Shoots .5 MOA or less with 168 SMK/ 175 AMAX and Varget.
http://i1292.photobucket.com/albums/...pswhfq4f77.jpg
http://i1292.photobucket.com/albums/...pswu0crcin.jpg
http://i1292.photobucket.com/albums/...psm3zzt98o.jpg
Built this Savage 10 in .243 about 3 years ago with the help of this forum. The first trip out i was fortunate enough to take this pronghorn at 405 yards.
http://i1292.photobucket.com/albums/...psx67pcuik.jpg
http://i1292.photobucket.com/albums/...pslrqxzgqh.jpg
Just finally got mine back and put together
Stevens 200 action trued
Benchmark barrel 8 twist in 6.5 creedmoor
Threaded for suppresser
Coated in sniper gray
Nss barrel nut and recoil lug
Rifle basix sac-1
Nightforce 20 moa base
Vortex pmr rings
H-S precision stock (I painted)
Cdi bottom metal
MAGpul 10 round mag http://uploads.tapatalk-cdn.com/2016...f68d740daa.jpghttp://uploads.tapatalk-cdn.com/2016...73be724801.jpghttp://uploads.tapatalk-cdn.com/2016...1c5ef8719e.jpghttp://uploads.tapatalk-cdn.com/2016...9383efba9f.jpghttp://uploads.tapatalk-cdn.com/2016...7727be2431.jpg
Nightforce 3.5-15x56 moar reticle.
Cheap Chinese bubble level. I like the size.
I think that's about the whole list. Hope to get out this weekend and break in the barrel. I am no photographer.
Sent from my iPhone using Tapatalk
[IMG]http://i67.tinypic.com/2z8ch7t.jpg[/IMG]
ill toss it in here too , i put it in the the tac pics too , i just got the paint done a month ago, now waiting on my new barrel (32 inch with break bull ) hoping i did the right thing stepping up from 338 winbag to 338 rum.
Sweet
Got any specs on that thing?
Sent from my iPhone using Tapatalk
Savage fcp-k 308
Xlr chassis cerakote custom color FDE/burnt bronze
nightforce nxs 5.5-22x50
Thunderbeast 9" ti suppressor
Atlas bipod
Alpha magazine
PTG bolt body
I'm sure I'm forgetting lots of little pieces, thanks guys
http://uploads.tapatalk-cdn.com/2016...f39a622bd1.jpg