Have a long action savage axis that I would like to do a barrel swap on to .308. Already has a .473 bolt face. Any issues with feeding and the mag length.
Printable View
Have a long action savage axis that I would like to do a barrel swap on to .308. Already has a .473 bolt face. Any issues with feeding and the mag length.
If you are using a factory Axis stock all you have to do is change trigger guard and use 308 magazine.
Sent from my iPhone using Tapatalk
I thought all Axis actions were same length. Only the magazine and trigger guard change.
That would be great. Nice easy switch
Gun is chambered in 30-06 right now
Anyone know what the mag length is for the 308 Mags.
Just thinking I may be better off keeping my mag if using longer eld/ vld style bullets
Do...
you...
always....
need to use multiple posts, or were you deliberately trying to pad your post count to reach 20 to use the PM system? (since you specifically asked about it earlier)
After thought
You have t get up early in the morning to fool Jim.
That's what the "Edit Post" button in the light grey bar below your post is for.Quote:
Originally Posted by Chief80
Received my new .308 barrel today. Will report back after some Range time
You shouldn't have any problem feeding the .308 from the -06 magazine. Only thing that could/would post an issue is if you were loading very short bullets (115-125gr) in which case the rear of the case could pass free of the feed lips before the bullet tip was started into the chamber. With the longer VLD style bullets that won't be an issue.