405 Winchester with a belt
https://lh3.googleusercontent.com/7r...w=w274-h600-nohttps://lh3.googleusercontent.com/ZQ...0=w184-h500-nohttps://lh3.googleusercontent.com/4h...Z=w385-h326-no
I take 9.3x66 case and run it thru my homemade belting dies and..........I end up with a 405 belted case that can be loaded with 405 dies
I also rebate the rim to .473".
Waiting on a Shilen Barrel.......and I also need to grind a reamer.
The case holds 78 grains of water.
I like the cut off 260 grain X bullet, but with deeper free bore I can load the 300 to a length of 2.530"
The ole Axis test gun is getting a work out!
Also working on a 444 Belted using a 9.3x62 case.