Need some info on striker s# F703880. How do i tell what gen it is and also is the roller on the trigger assm. to be free and roll or to be tight like mine is?
Thanks for any info you can give me
Larry
Printable View
Need some info on striker s# F703880. How do i tell what gen it is and also is the roller on the trigger assm. to be free and roll or to be tight like mine is?
Thanks for any info you can give me
Larry
I am pretty certain the roller model is a 1st generation. One with a bar to the sear is a 3rd. Not sure what a 2nd looks like. The roller should move freely. I used Kroil and a flat needle nose to get mine rolling again. Just don't scratch the roller up.
Go to specialty pistols forum and search. There is pictures in threads on there of different triggers.
Look for blueavenger's threads if they are still here, great detailed pictures for all trigger assemblies. Haven't heard from him for a while.
Thanks guys for the info. I will keep looking. Found a site saying the roller should not roll!!!!!!!!!!!!!!!!!
Larry
http://specialtypistols.infopop.cc/e...646#8820060646
http://specialtypistols.infopop.cc/e...616#5230012616
Here is a couple for you. I still could not find Blueavenger's thread that was very detailed.
http://specialtypistols.infopop.cc/e...766#5900043766
There probably aren't enough strikers around to make this modification profitable, but it could be an improvement. I have a gen 1 and it is the best of the two i tried. blueavenger had good pics of all tree gens can't find the post either.
You might shoot tylerwoodard a message, he has several. I think my roller is fixed, have read it can be buffed to smooth.
Thanks again guys, I am working on it.
larryk40c, you may want to read the two sticky's at the top of the list of threads on Strikers and you should find a lot of helpful information on the subject.