Re: 220F help/short review
Oh crap! Finally got the rear bolt out to disassemble the whole bolt. To my surprise, the internals are far different from the Savage bolt action rifle.
Sharpshooter, I think I'm gonna need your help here!!!!!
http://img.photobucket.com/albums/v2...220bolt001.jpg
http://img.photobucket.com/albums/v2...220bolt002.jpg
*Or should I be using nothing but 3" shells?
Re: 220F help/short review
Had no failures to fire with mine or ejection issues as long as I worked the bolt like I meant it. Did take the bolt apart and managed to put it back together with no problems. I polished the black off of my bolt body. Seemed kinda soft and was dragging on the reciever and scratching it all to He!!, polished it to a mirror finish and now it's slicker than snot. Hornady SST's did not group well for me at all. Need to get some rem's and federals and give it another try.
Re: 220F help/short review
EFBell,
Were you shooting 2 3/4" or 3" ammo? Oh, trigger guard is definitely metal...magnet sticks to it! ;D
May have to call Savage on the FTF issue......something is not right.
Re: 220F help/short review
2-3/4" SST's and 3" winchester el cheapo rifled slugs to get on paper.
I took mine apart to clean and lube and put back together without a thorough exam but I dont remember seeing much you could do.
Sharpshooter, please help!
Quote:
I took mine apart to clean and lube and put back together without a thorough exam but I dont remember seeing much you could do.
I know, I was hoping for something like the centerfire setup.....the shells that didn't go off only had a very slight dimple on 'em. I mean very slight.
I don't think there's any adjustment that can be made to the firing pin protrusion. It's all one piece with a spring at the back end.......weak spring maybe?
Oh well, I've got several actions in the safe and have never had an issue. Guess good 'ole Murphy caught up to me. I'm just glad I found the problem now and not real close to deer season!
Sharpshooter, I could really use your input here!!!
Re: 220F help/short review
Shoot Fred a PM with a link to this thread as I don't think he looks in here very often.
Re: 220F help/short review
looks like if you need more protrusion, you would have to take some length off the tail of the bolt head
Re: 220F help/short review
My pin sticks out .050.
From the shoulder above the cocking pin it measures 5.755" to the tip. Should be a good reference number. My caliper is only a 6" so I could not measure total overall length accurately.
Re: 220F help/short review
Wow! .050" vs. .031" is a very big difference.
Blue,
How would taking material of the tail of the bolt head increase protrusion? The bolt head is held in place by the pin......or does the tail stop the forward travel of the firing pin?
Re: 220F help/short review
I am just guessing from your pictures, but it looks like the pin stops against the bolt head. If the tail of the bolt head were trimmed .o14 to let it travel more you would have .0450 protrusion. With out the parts in front of me to play with that is just a WAG :)
next thing to look at before doing anything, it there enough room for the cocking pin to travel that much in the decocked position?
Re: 220F help/short review
I would contact Savage about it. Does the pin measure the same as mine? Either the pin is short, the bolt head is thicker, the slot is shallow for the cocking pin or other; such as bolt body too long, baffle too thick. on and on...
Re: 220F help/short review
.031" is a bit short for a shotgun. Rim thickness will vary from brand to brand and I've seen the most problems with Winchester being the thinnest. If you look at the rim clearance cut in the barrel you will notice it is beveled. If a rim is slightly thinner and/or smaller in diameter it will change the heaspace more than just the difference in the thickness of the rim because it lets the rim drop deeper into the chamber. I would imagine the headspace is correct, even if it is on the big side of the tolerance.
The problem with the new fire control systym is there is no adjustment to the firing pins themselves. You will either have to turn some off the shoulder of the pin, or like Greg said, trim some from the back end of the bolt head, if you want to go that far. I'd call Savage first and ask about the protrusion, if it isn't right they most probably send you a new firing pin.
The firing pin spring is weaker than a centerfire version, that's why it cocks easier. Well, maybe not weaker, it's just shorter and has a different spring rate. Shot guns generate less pressure and need less support at the primer and that's why they can get away with that set-up.
I had an opportunity to visit with Chris Bezzina at the Shot show and he asked my opinion on this, as they were considering using the same system in the rifles.
He favored it because it make the guns cock easier, and cut pruduction costs. I made him aware of the fact that it may not work in a rifle from the standpoint of less primer support due to the fact of the difference in the spring. I also pointed out that it took away the adjustability factor which could compensate for problems just as you are having. Basically I was doing my best to talk him out of the idea.
No doubt that you have short firing pin protrusion, I'd bet on that for sure. You may have a weak spring, but I'll bet when the protrusion is correct the Winchester will light.
Re: 220F help/short review
Great info Fred. Definately an interesting read.
Re: 220F help/short review
Thanks Sharpshooter! Not ready to machine any parts at this time.
I'll get in touch with Savage asap to see if they can just send me some parts.
Will update once I get some info.
Thanks again!
Re: 220F help/short review
Yeah, be sure to keep us updated on what they say, and the result of the fix too. I'm really considering cashing in on one of these(if I can sell my Remmy 870), just gotta have all you testers work out the bugs first...LOL
Re: 220F help/short review
quick update: guess I'll call it part I
Called Savage this morning and explained the problem and advised I wanted to get a new firing pin and spring. No issue with getting the parts under warranty but Savage will only ship internal bolt parts to an FFL holder.
The lady I talked to was very polite and helpful. Soooo, I stopped off at the shop where I bought the gun and told the owner of my issue. He called Savage while I was there and faxed a copy of his FFL to Savage with a list of part numbers. Hopefully, I'll have the new stuff early next week.
While I was there, I took a peek at one of the new 220F's he had in stock. The firing pin obviously had more protrusion than mine and the tip was rounded....mine is flat at the end. Unlike NLPeaden, I don't carry a caliper in my pocket so I wasn't able to measure the protrusion but it was clearly longer looking at it with the naked eye. ;)
Part II update will have to wait until I get the new parts. So far, big kudos to Savage customer service.
Re: 220F help/short review
Quote:
Originally Posted by trappst
quick update: guess I'll call it part I
Called Savage this morning and explained the problem and advised I wanted to get a new firing pin and spring. No issue with getting the parts under warranty but Savage will only ship internal bolt parts to an FFL holder.
The lady I talked to was very polite and helpful. Soooo, I stopped off at the shop where I bought the gun and told the owner of my issue. He called Savage while I was there and faxed a copy of his FFL to Savage with a list of part numbers. Hopefully, I'll have the new stuff early next week.
While I was there, I took a peek at one of the new 220F's he had in stock. The firing pin obviously had more protrusion than mine and the tip was rounded....mine is flat at the end. Unlike NLPeaden, I don't carry a caliper in my pocket so I wasn't able to measure the protrusion but it was clearly longer looking at it with the naked eye. ;)
Part II update will have to wait until I get the new parts. So far, big kudos to Savage customer service.
Sounds like your pin was damaged somehow. Mine is rounded also.
Re: 220F help/short review
Could somebody tell me the barrel thread and muzzle diameter on the 220F?
Re: 220F help/short review
Couldn't tell you what the thread is but the muzzle "OD" is .808 by my caliper.
Re: 220F help/short review
Re: 220F help/short review
Quote:
From the shoulder above the cocking pin it measures 5.755" to the tip. Should be a good reference number. My caliper is only a 6" so I could not measure total overall length accurately.
Mine is 5.722"ish so I've definitely got a broken firing pin or something along those lines. If it did break, it's a clean break....very flat.
Quote:
Could somebody tell me the barrel thread and muzzle diameter on the 220F?
Shank size should be the same as the large shank Savage. Although I can't confirm that or the pitch, etc.
Re: 220F help/short review
Quote:
Originally Posted by trappst
Mine is 5.722"ish so I've definitely got a broken firing pin or something along those lines. If it did break, it's a clean break....very flat.
I could be that is was turned on an automated machine and the piece of stock was slightly shorter than it was supposed to have been.
Re: 220F help/short review
Well thats pretty close to "30 thou" shy. So I'm guessing we found the problem for sure.
Re: 220F help/short review
Quick update: Part II
Got the new parts from Savage. I had them ship me a new firing pin and spring just in case. Got the new parts installed and the firing pin protrusion is now .051".
Unfortunately, I won't have time to do any more shooting for a few days so I'll confirm the fix once I put some more rounds down range.
Thanks again to all! BTW, Savage customer service was fabulous!