Were did you get that long sunshade, Bushnell hasn't made them in for ever.
Nice rifle.
Savage 111
Trued action
Nss barrel nut and recoil lug
Benchmark 300 win mag 1/10 twist 24inch.
Muzzle brake and more brake
Rifle basics sav1 trigger
Nightforce 20moa base
Killer innovations rings
H-s precision stock. Bedded
Weaver superslam euro 4-20x50
K G gun kote fde barreled action.
K G gun kote black brake and bolt
190 Berger vld in Norma brass with h1000 2996fps. Shoots lights out. https://uploads.tapatalk-cdn.com/201...eefd4e777d.jpghttps://uploads.tapatalk-cdn.com/201...118f3b4410.jpg
Sent from my iPhone using Tapatalk
Stevens 200 action trued
Nss barrel nut and recoil lug
Benchmark 6.5 creedmoor 24 inch barrel
Rifle basics sav1 trigger
Nightforce 20 moa base
Nightforce ultra light rings
H-s precision stock bedded
Nightforce nsx 3.5-15x56
Action coated sniper gray.
Cdi bottom metal.
Magpul mag.
10 inch form1 titanium suppressor
143 eldx in hornday brass with 4350. 2655 fps.
https://uploads.tapatalk-cdn.com/201...30ae8bd0c6.jpghttps://uploads.tapatalk-cdn.com/201...ed1545ac07.jpghttps://uploads.tapatalk-cdn.com/201...786b8a2d64.jpg
Sent from my iPhone using Tapatalk
Very nice, grate job !!!!!!!!!!!!!!!!!!!
From this,
http://i46.photobucket.com/albums/f1...in1/Turd-1.jpg
To this,
http://i46.photobucket.com/albums/f1...pszzuink6n.jpg
Barrel swapped to a 22" barrel picked up here from member Rstrick0352
.308 10FP accutrigger
B&C Duramaxx
SSS bolt knob
20moa Farrell Base
TPS TSR-W rings
Nikon Monarch 4x16x42 mildot
Harris swivel bipod
Sig SRD762 Suppressor
Dick's Special 10T in .308 cut down to 18" and threaded dropped in an HS Precision stock. I'm itching to swap into a 260 barrel and I think a CDI bottom metal setup would be sweet on her. I also have a Vortex 6-24 I plan on mounting in some lightweight rings to save some on weight.
Here's how she started out:
https://c1.staticflickr.com/4/3717/1...b56c2029_b.jpgUntitled by Chrazy-Chris, on Flickr
And how she currently sits:
https://c1.staticflickr.com/2/1672/2...4e3513ba_b.jpgIMG_20160130_134340519 by Chrazy-Chris, on Flickr
https://c1.staticflickr.com/2/1476/2...bf0041b3_b.jpgIMG_20160130_134401460 by Chrazy-Chris, on Flickr
https://c1.staticflickr.com/2/1549/2...f1fd619f_b.jpgIMG_20160203_203508 by Chrazy-Chris, on Flickr
https://c1.staticflickr.com/6/5645/2...ede5a684_b.jpgIMG_20150823_104105490_HDR by Chrazy-Chris, on Flickr
Old because I've had it a couple months and have shown it here, and new because it's sporting its new Shilen Stainless Select Match 28" barrel.
http://i89.photobucket.com/albums/k2...psdi664rf0.jpg
With NF 5-20 scope.
http://i89.photobucket.com/albums/k2...psdjhmv6mh.jpg
Took this firsttimer only about an hour with the tools purchased from Northland SS.
http://i89.photobucket.com/albums/k2...psbjgy3pi7.jpg
Fresh rebuild on the 308.
http://i1292.photobucket.com/albums/...psoekyo711.jpg
http://i1292.photobucket.com/albums/...psssbfiar4.jpg
I am diggin that paint ^^^^!! Nice job man!!
DK
10 FCP-SR 6.5 Creedmoor, Manners T2A, Accurate Mag bottom metal, Burris XTR II 4-20x FFP SCR reticle, Seekins 20 moa base and rings. Previously in a B&C Medalist M40 with KMW Loggerhead (now for sale in classifieds).
Attachment 2848
Good detail on the paint. Stock looks like a Choate
..,
Thank you. Yea its a Choate i bought way back when.
This is my Savage "Tactical" that started out as a simple 10T purchased on sale from Cabela's.
https://im1.shutterfly.com/ng/servic...907970/enhance
A five shot warm-up:
https://im1.shutterfly.com/ng/servic...745318/enhance
A 15 shot string:
https://im1.shutterfly.com/ng/servic...746025/enhance
Distance was only 100 yards but the wind was a full value 12 mph @ 90 degrees.
Rifle: Savage 10T Tactical
Barrel: Benchmark 6.5 Creedmoor, 24", 1:8, 3-Groove with Benchmark Tactical Brake
Chassis: MDT Tac-21 w/Magpul PRS stock and MIAD group
Bipod: Atlas PSR
Trigger: OE Savage Accutrigger adjusted to 1#
Anti-Cant Level: US Optics Anti-Cant Folding
Ammo: Lapua .308 Palma Cases reformed to 6.5 Creedmoor
39.5 gr H-4350
BR-4 CCI Small Rifle Benchrest Primer
Scope: NightForce 5-25X56 B.E.A.S.T. on Seekins/Vortex rings
Honrady 140 gr ELD-M @2665 fps
New FCPL-SR, MDT LSS XL chassis, Magpul PRS stock, Leupold Mark 4 20 MOA Picatinney rail, Burris XTR II 5-25X50, Harris Bi-pod, and soon to be installed American Precision Fat Bastard Gen II muzzle brake
Attachment 2858Attachment 2859
How do y'all post pics?
My first stage of the build. Savage axis .243 heavy barrel with a letherwood 6-24 scope with anti cant bubble level on the rail, a homemade cheek riser, and a rockite reinforced forend.https://uploads.tapatalk-cdn.com/201...76348c8ba9.jpghttps://uploads.tapatalk-cdn.com/201...dd9ce3eb08.jpg
Sent from my SAMSUNG-SM-G930A using Tapatalk
I think I'm finally done messing around with this, now it's time to hit the range and see how it shoots.
http://i46.photobucket.com/albums/f1...psglzh0osg.jpg
308 10FP accutrigger
B&C Duramaxx
SSS bolt knob
20moa Farrell Base
TPS TSR-W rings
Vortex Viper HS-T 6-24x50
Harris swivel bipod
Sig SRD762 Suppressor
My 1st Savage .308 Custom for FTR Competition. Still putting the components on it and soon will be developing a load.
[IMG]http://i1277.photobucket.com/albums/...pspixfibi5.jpg[/IMG]
[IMG]http://i1277.photobucket.com/albums/...pss7hrvvet.jpg[/IMG]
[IMG]http://i1277.photobucket.com/albums/...psy1nhp9sm.jpg[/IMG]
http://i1369.photobucket.com/albums/...pssxcsv37u.jpg
I just finished this one, need to do some load development.
110 flat long action
X-Caliber 24" varmint contour chambered in 6.5x55
Northland recoil lug and nut
Warne steel scope rail
SSS tactical bolt handle
HS Precision stock
CDI bottom metal
Accurate 30-06 mag
Accu-Shot bipod rail
Triad stock pack
AI scope mount
I have my wife's Bushnell Elite Tactical on it now, still need to buy a scope. :)