Factory Savage 23 sight wanted.

Looking for a rear peep sight for a Savage 23D .22 Hornet. Looks like this. Thanks for your help!

http://cdn2.bigcommerce.com/server51...0.1280.JPG?c=2

The sight you have pictured is an early No 5 with a single #12 mounting screw and was only used on the very early 1919 NRA's. Later No 5's added a second #5 size mounting screw spaced about 1.50" back. That's not a very sturdy sight and requires a taller front. I think the No 10, which mounts with the same two different size screws and the same hole spacing, would be a better option and I see both the No 5 & No 10 selling for about the same money. I think the No 10 would also require a taller front sight.

The no 5 sight was only used for a short time after the introduction of the 23-D. The 23-D first shows up in a Jan 25, 1932 price list I have and is not in a Jan 15, 1931 - the No 10 sight shows up in a price list from April 1, 1933. The 23-D's made after about March 5, 1936 would be drilled & tapped for the No 15 rear sight, it mounts with two screws the same size with a .875" hole spacing (I think #8's). The #10-36 (or possibly 3/16"-36) & #5-48 Mounting screws for the earlier sights can be hard to find.

Thanks for the info. You are correct, mine has three factory holes in the receiver, the two 6-48's .875" apart and one 10-32. I believe mine was made briefly, post WWII. I doubt I will find a sight and if I do it will be $$$$$!!
I have adapted a Brownell's 3/8" dovetail base to the existing holes, and will mount a vintage Weaver scope to it. I shot it with the open sights and they don't like my old eyes, but I do shoot quite well with peeps. I have the same rifle in .25-20 with an old Lyman peep, and I shoot that one very well!
You can see a picture of the 23D posted in vintage rifles.