You will need the mag and follower as the followers are specific to each mag as they have notches in the sides to match the dimples in the magazine boxes.
Printable View
I just had this same exact issue when I screwed my .284 Win barrel onto a short action 110 and feeding from a .308 magazine. The back tab on the mag housings angles towards the rear a little at the top, allowing the top round(s) to sit further back. As a result, they sit back further than the bolt can reach to get behind the case head so when you go to chamber a round it slides over for 1/2" or so then catches on the body of the case and pushes it forward ultimately resulting in a jam. Was also gouging the heck out of my brass.
Took it out to Fred and had him examine it and determined the easiest solution was to simply grind some thickness off the back side of the front baffle on the right side that acts as the bolt stop on the sear to allow the bolt to come back a little further. Didn't need to take much off, roughly 3/32" to get it feeding properly and reliably.
Attachment 5659
That is not the same as i was having. I'll post video in about an hour
This is what mine is doing
https://youtu.be/lIshPsozrvg
Time to shape the forend andthings are about to get rough
https://uploads.tapatalk-cdn.com/201...e27e1daa93.jpg
Oh my god so stressfull. Only rough shapped and a lot more to go. I was forced to make a decision that I've beennthinking about doing anyways. The white dot in the middle of rhe rosewood is a dowel and thats where I will now be putting a quick detach cup for a sling.
https://uploads.tapatalk-cdn.com/201...7266ea69fe.jpg https://uploads.tapatalk-cdn.com/201...1e22fbbfeb.jpg
https://uploads.tapatalk-cdn.com/201...f812bcb3ad.jpg
https://uploads.tapatalk-cdn.com/201...7adcbe9a97.jpg
https://uploads.tapatalk-cdn.com/201...4fb24edf33.jpg
https://uploads.tapatalk-cdn.com/201...9f2dd8a902.jpg
Looking good.
Is it just me, or does the left side of the forearm look a little thicker (wider) than the right side in the second to last photo. Maybe it's just the angle or lighting/shadow making it appear that way.
Its not necessarily thicker just one side is rounded more I think.
Well did a lot of work today and its starting to take better shape! At least I think. My girlfriend liked the blunt end the way it was before but oh well its my gun not hers.https://uploads.tapatalk-cdn.com/201...11df300824.jpghttps://uploads.tapatalk-cdn.com/201...ea53f27dd9.jpghttps://uploads.tapatalk-cdn.com/201...87beafb556.jpghttps://uploads.tapatalk-cdn.com/201...ed75e3c042.jpg
Looking good! I can't wait to see how it turns out.
Got some important parts I today. I don't think I'll put then in today but maybe this weekend.
https://uploads.tapatalk-cdn.com/201...73bc1a64ec.jpg
I ended up using 1 of the pillars to make both. This wasn't too hard as long as you have a belt sander, micrometer and a dremel. I did try to drill the holes 1 size at a time but it broke away the wood. This sucks but since I'll be using jb weld I think it'll be ok.
Notching the pillars to fit the action kinda sucked but oh well.https://uploads.tapatalk-cdn.com/201...8353beee55.jpghttps://uploads.tapatalk-cdn.com/201...a5326fa870.jpghttps://uploads.tapatalk-cdn.com/201...c0c2d3e02c.jpghttps://uploads.tapatalk-cdn.com/201...dfdba85acd.jpghttps://uploads.tapatalk-cdn.com/201...5635ac978f.jpghttps://uploads.tapatalk-cdn.com/201...b87d032cb4.jpghttps://uploads.tapatalk-cdn.com/201...c060144e68.jpghttps://uploads.tapatalk-cdn.com/201...da27264877.jpghttps://uploads.tapatalk-cdn.com/201...57db767653.jpg
A long over due update.
https://youtu.be/ZOGaHD7Beu8
Sent from my SM-G960U using Tapatalk
Very cool. Would love to se some up close photos now that it is 95% complete.
Still more shaping to do on the for end then a light 600grit sanding to the whole thing then lacquer it. I will be installing QD swivel mounts as well. 1 in the forest where you can see the dowel that holds the rosewood and not sure where in the butt yet.
The pictures can't show the chatoyance but soon enough is going to look awesome!
I do want to get lower rings as well but I'm super excited to get this going.https://uploads.tapatalk-cdn.com/202...a676c72329.jpghttps://uploads.tapatalk-cdn.com/202...a527fec9fc.jpghttps://uploads.tapatalk-cdn.com/202...a0a081ad37.jpghttps://uploads.tapatalk-cdn.com/202...f7726a1cdc.jpghttps://uploads.tapatalk-cdn.com/202...c7bc728e00.jpghttps://uploads.tapatalk-cdn.com/202...edd8ed5967.jpghttps://uploads.tapatalk-cdn.com/202...436685758d.jpghttps://uploads.tapatalk-cdn.com/202...b01093a5f2.jpghttps://uploads.tapatalk-cdn.com/202...f5670761af.jpg
Sent from my SM-G960U using Tapatalk
I finally got to shoot this sweet little thing!!!! Not bad for 1st shots using TulAmmo. It's such a sweet soft shooter.
https://youtu.be/MgjeWXfmbOA
Sent from my SM-G960U using Tapatalk
https://uploads.tapatalk-cdn.com/202...636674927a.jpg
Great job. It must feel great to have it done.