Mods for 64 Magazine & Reflex added

Hi - Just a quick note to advise a possible mod to help with 64 Magazines. I've had trouble with these for years and done many things to try to get them functioning well, polishing the ramp, cutting a spring(not advisable),filing 'sharp edges', etc. Older posts detail these attempts. Anyway, 5 out of 6 just recently started to frequently 'catch' on the bolt and stop the cycle. So after finding one that worked well and noting the position of the 'rear' ledge stop, I mixed up a batch of JB and applied a bit to each of the offenders. The next day I tested them and made slight adjustments with a fine file. The result has worked OK so far - no hang ups. Funny thing is the JB looks different on each and a couple didn't need any filing at all, but they ALL work now. We'll see how this holds up and advise if they fail. :eek:
On another note, I just put a cheap Reflex on with an offset mount I had unused. It has to be 45* since it cannot tip any more to the left, but it aligns with my Left eye. I co-registered it at 50 just to see how it worked for 'snap-shots'. It works OK, a bit quicker than the scope for 3-4 " POI. I'll keep track of this one and advise, too. Pics attached.
** SORRY - pics of Reflex 'vanished -this AM, fixed Noon Tues. **

Mags w-JB
[IMG]https://i.postimg.cc/PPgfc5sJ/DSCN7518.jpg[/IMG] [IMG]https://i.postimg.cc/VSXMJh1s/DSCN7520.jpg[/IMG]


Reflex on 64
[IMG]https://i.postimg.cc/qNwYK1Lr/Sav64-w-Reflex-2.jpg[/IMG] [IMG]https://i.postimg.cc/NyPzJLSP/Sav64-w-Reflex-4.jpg[/IMG]
[IMG]https://i.postimg.cc/WdTCtB0S/Sav64-w-Reflex-1.jpg[/IMG]

HI - Just an update. I was out today and this mod seem to be working OK. Well, the JB has done the trick on 5 of the 6 mags. I think that one was filed down just a hair too much. It worked OK with snaps but today at the range it still 'caught' the bolt and wouldn't cycle at all. The others were great. Today I fired about 100 rounds with NO feed probs, firing pin probs (I've 're-shaped' the striking surface - it had ca. 1000 rounds and was light-striking) and had some one-hole groups of 5 at 25yds, and most under 1" AT 50.
I bought a Bushnell Engage 6-18x50 for my Rem SPS-TAC .308 and moved the Vortex 4-12x40 onto the Savage-64 so I had to shoot lots of 25yd to get this zeroed. Then, I had put a reflex ($40CDN amazon.ca) on a scope-side mount and had to shoot about 30 to zero that at 25 then 50. Now ready for 'snap-shots' with the reflex or 'good' shots with the scope.
But the main thing is that the JB works and I was rotating the mags every 5 rounds so all 5 got a workout and the JB held, at least thru 5 reps so far.
I'll keep updates as the summer goes on.
Ed

Great minds think alike (almost)!

I added a micro-thin patch of JBWeld to the magazine housing. Now all of my magazines work flawlessly.

https://lh3.googleusercontent.com/lg...-no?authuser=0